Related Manuals for Beko BDIS38120A
Summary of Contents for Beko BDIS38120A
- Page 1 Dishwasher User’s Manual Dishwasher User’s Manual BDIS38120A 150 0077 0100_BEKO_45E9_EN/ 24-03-22.(17:38)
- Page 2 Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
-
Page 3: Table Of Contents
CONTENTS 1 INSTRUCTIONS FOR SAFETY 5 OPERATING THE PRODUCT 28 Programme Selection / Programme AND ENVIRONMENT Cancel key ..........29 General safety ........4 Function Keys ........29 Intended use ..........4 Preparing the machine...... 29 Children’s safety ........5 Programme selection ......29 Disposing of packaging material ..5 Auxiliary functions ......31 Transportation of the product ....5... -
Page 4: Instructions For Safety And Environment
instructions for safety and environment This section contains safety Never touch the plug with • instructions that will help to get wet hands! Never unplug by protected from risk of personal pulling on the cable, always injury or property damage. Failure pull out by grabbing the plug. -
Page 5: Children's Safety
instructions for safety and environment Children’s safety This appliance is intended • to be used in household and Electrical products are • similar applications such as: dangerous for the children. - Staff kitchen areas in shops, Keep children away from the offices and other working product when it is in use. -
Page 6: Compliance With Weee Directive And Disposing Of The Waste Product
instructions for safety and environment Package information 1. Unplug the product before transporting it. Packaging materials of the 2. Remove water drainage and product are manufactured water supply connections. from recyclable materials in accordance with our National 3. Drain the remaining water in Environment Regulations. -
Page 7: Dishwasher Overview
Dishwasher Overview Upper basket Cutlery basket Lower basket Automatic Liquid/Gel Detergent and Rinse Aid Dosing System Type Label Control panel Door Lower impeller Salt reservoir lid 10. Filters 11. Upper impeller 12. Upper basket rail 13. Upper cutlery basket ( depends on model ) 14. -
Page 8: Fan Drying System
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label) -
Page 9: Installation
Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. To location make the product ready for use, make sure Place the product on a solid and flat • that the electricity, tap water supply and floor that has sufficient load carrying water drainage systems are appropriate capacity! The product must be... -
Page 10: Connection To The Drain
Installation connected to the drain hole or sink’s drainage. Permitted water temperature: The length of this connection must be min. 50 up to 25°C ( 60°C for products cm and max. 100 cm from the floor. A discharge equipped with Aquasafe+; please hose longer than 4 meters causes dirty refer toAquasafe+ section ) washing. -
Page 11: Adjusting The Feet
Installation The voltage and allowed fuse or • breaker protection are specified in the “Technical specifications” section. If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electrician install a 16 Amp fuse. -
Page 12: Preparation Tips For Energy Saving
Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy- Cleaning, rinsing and drying performance of efficient manner. your dishwasher will increase when water Wipe away any coarse food remnants on softening system is adjusted properly. - Page 13 Preparation Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for the water for about strip from the water you the hardness packet.
- Page 14 Preparation In order to protect your glassware against glass corrosion in an optimal way, you have to perform the same hardness settings, which you have made in the control panel, with the regeneration setting switch. For example, if you have adjusted to “3rd level” in the control panel, also set the regeneration adjustment switch to 3rd level.
-
Page 15: Adding Salt
Preparation water, stir it with a spoon. If you move your house, it is necessary to readjust water You can put about 2 kg of hardness level of your machine softening salt into the salt by considering the information reservoir. given above according to the 5. -
Page 16: Adding Liquid/Gel Detergent And Rinse Aid
Preparation aid and liquid/gel detergent required for the Please follow the instructions selected washing programme is adjusted given in section “Operating the automatically. Product” to change the settings of the Automatic Liquid/Gel Please read the information Detergent Dosing System and given in section “Operating Rinse Aid. - Page 17 Preparation The rinse aid used in dishwashers is a special product that is recommended to increase drying efficiency and prevent water or lime stains on the washed items. For this reason, care must be paid to have rinse aid in the After fully opening the door of the rinse aid reservoir and to use dishwasher, open the decorative cover as...
- Page 18 Preparation When the detergent warning Use only liquid/gel detergent lamp gives a warning, it will go suitable for the dishwasher. away in a short while after you add liquid/gel detergent. If the Do not mix different brands of warning light is still on after a liquid/gel detergents.
-
Page 19: Powder Detergents
Preparation Installing/Removing the Liquid/ To use powder detergents, Gel Detergent and Rinse Aid Box go to the Settings menu to Top remove the rinse aid and detergent disable the Automatic Liquid/ boxes, push and lift the system cover on Gel Detergent Dosing System both sides as shown with arrows 1 and 2 and if any, the Tablet Detergent and open. -
Page 20: Tablet Detergents
Preparation Do not leave your dishes with colored Place the tablet detergent into stains for a long time the Tablet Detergent Box found 2. Use longer programs like Eco or on the upper basket of the Intensive. dishwasher (A). 3. Check quality and storing conditions of When using tablet detergents, your detergent you can use the Tablet... - Page 21 Preparation 4. Make the appropriate rinse aid settings. in the dishwasher. Thus, accumulation of water in deep hollows is prevented. Items not suitable for washing in the dishwasher To prevent possible injuries, Never wash dishes soiled by cigarette always place the sharp and •...
- Page 22 Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket /44 EN Dishwasher / User’s Manual...
-
Page 23: Cutlery Basket
Preparation Cutlery basket Collapsible lower basket tines (depends on model) Cutlery basket is designed to wash your (depends on model) dishes such as knife, fork, spoon, etc. in an Foldable tines (A) located at the lower efficient manner. basket of the machine are designed for Since the cutlery basket can be moved (A, an easier placement of large pieces such B), you can create more space while placing... -
Page 24: Collapsible Lower Basket Tines
Preparation Bringing the tines to the horizontal position by holding them from the tips may cause them to bend. Therefore, it will be appropriate to bring the tines in the middle to horizontal or vertical position by holding them from their stems and pushing in the direction of arrow. -
Page 25: Lower Basket Bottle Wire
Preparation Lower basket bottle wire (depends on model) The bottle wire is designed for easier washing of long pieces with wide mouths. You may take out the bottle wire from the basket when not in use by pulling it out from both sides (H). -
Page 26: Adjusting The Height Of The Upper Basket
Preparation Adjusting the height of the To raise the basket, hold the wires of the basket and pull the basket upwards upper basket with both hands while the basket is at (depends on model) the lowermost position (B) Upper basket height adjustment 2. -
Page 27: Collapsible Upper Basket Wires
Preparation Collapsible upper basket Ceiling cutlery basket wires (depends on model) Ceiling cutlery basket is designed to wash (depends on model) your cutlery items such as forks, spoons You can use collapsible wires when you and etc. by placing them between the bars need a larger space for your dishes in the on the basket. -
Page 28: Operating The Product
Operating the product 3 4 5 On / Off Key 2. Programme Selection Keys 3. Menu Direction Selection Key / Hygiene Intense function 4. Menu Key (3 sec) / Selection / Confirmation Key / AquaIntense Function Fast+ Function 5. Menu Direction Selection Key / 6. -
Page 29: Programme Selection / Programme Cancel Key
Operating the product On/Off Key Programme selection When you press the On/Off key, the Press the On/Off button to turn on indicator lights illuminate on the display your machine. for ON position. The lights turn off in OFF 2. Check the Salt and Rinse Aid indicators position. - Page 30 Operating the product /44 EN Dishwasher / User’s Manual...
-
Page 31: Auxiliary Functions
Operating the product Auxiliary functions Fast+ Function It shortens the time of the washing cycle Washing programmes of your dishwasher selected and decreases water consumption are designed to obtain the best cleaning by enabling washing under higher pressure. effect, considering the type of the soiling, soiling degree and properties of the dishes Floor illumination to be washed. - Page 32 Operating the product Submenu Functions: Automatic Liquid/Gel Detergent Function (depends on the model) Off/On SelfDry Function Off/On Detergent use setting: Tablet Detergent Function Off/On Level 1: 10 ml lower than the default value Level 2: 5 ml lower than the default value Level 3: Use the default liquid detergent amount determined by the program.
- Page 33 Operating the product Tablet detergent function Interior Lighting (depends on model) (depends on the model) Allows to obtain a better drying Some models have interior lighting to performance from the multi-purpose illuminate the interior when the door is detergents called as all in one detergents opened.
-
Page 34: Scheduling The Washing Time
Operating the product Scheduling the washing 2 - 1 countdown, 0:01 is displayed, close time the door of the product and wait for the draining process complete. Draining is Time Delay completed in 2 minutes and the machine If an economical electricity tariff is applied gives an audible warning when it is in your region, you can use the Time completed. -
Page 35: Cancelling The Programme
Operating the product Cancelling the programme Adjusting the amount of rinse aid Open the door of the product Press and hold the Programme Selection / Programme After switching on your machine, press Cancel keys for 3 seconds. After the 3 - the Menu key for 3 second. -
Page 36: Water Cut-Off Warning
Operating the product InnerClean For energy saving, the machine is automatically turned off (depends on the model) following the completion of the This programme is recommended to be programme or if the programme operated on each 1-2 months for machine is not started. -
Page 37: Maintenance And Cleaning
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn off Check if food residues are left on the filters. -
Page 38: Cleaning The Hose Filter
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose. -
Page 39: Cleaning The Impellers
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to Lower impeller remove the upper impeller. -
Page 40: Troubleshooting
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •... - Page 41 Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
- Page 42 Troubleshooting the filling process. Run the prewash programme to remove the salt that spilled inside the machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour.
- Page 43 Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
- Page 44 Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.