Initial Operation; Cable Retainer; Preparing Eggs - Silvercrest 352644-2010 Operating Instructions Manual

Initial operation

Before starting to use the appliance, ensure that...
– the appliance, power plug and mains cable
and...
– all packaging materials have been removed from the appliance.
1) Clean all parts of the appliance as described in the section entitled "Cleaning
and care".
2) Unwind the mains cable
through the recess on the edge.
3) Insert the plug into a suitable mains power socket.
The appliance is now ready for use.

Cable retainer

There is a cable retainer
you to adjust the length of the cable
CAUTION – PROPERTY DAMAGE!
► Ensure that you always guide the mains cable
ing gap in the rear of the appliance base
NOTE
► Always wrap the power cable
wise direction. This reduces the length of the cable to a minimum, allowing
you to guide the mains cable

Preparing eggs

1) Pick a hole in the bottom of the egg with the egg pick
inside the egg to dissipate as it expands during boiling. It prevents the shell
from bursting open. The hole you pierced previously should point upwards
when you place the eggs in the cooking insert
2) Place up to 7 eggs on the cooking insert
3) Fill the measuring cup
water into the cooking bowl
4) Place the cooking insert
■ 8
│ GB│IE
from around the cable retainer
on the base of the appliance. This retainer
to your requirements.
for the sake of stability.
around the cable retainer
through the gap in the appliance base
with the picked side up.
up to the MAX marking with tap water and tip this
.
into the cooking bowl
are in perfect condition
and guide it
allows
through the correspond-
in a clock-
. This allows the air
.
and place the lid on top.
SED 400 A1
.