Logitech SLIM FOLIO PRO - Keyboard Case for iPad Pro 11 Manual

KNOW YOUR PRODUCT

SETTING UP THE CASE

1. Lay keyboard case flat and slide iPad into the bottom part of the holder.
2. Snap the top corners in place to secure iPad.

TURNING ON THE KEYBOARD

This product has an automatic wake/sleep feature. Anytime you dock the iPad in the upright typing position, the keyboard will automatically turn on When lifted out of type mode, the keyboard will automatically turn off to save battery.

PAIRING IPAD WITH KEYBOARD

1. Place iPad in the upright typing position The indicator light will blink, which means the keyboard is ready to pair
   Light isn't blinking?
   Go to iPad Settings > Bluetooth > On. Then press the Bluetooth button located in the top row of your keyboard Hold for 2 seconds until the status light blinks The keyboard is discoverable for 2 minutes.
   
2. Go to Settings > Bluetooth > Devices > Slim Folio Pro
   
   
3. A 6-digit code will appear on your iPad screen. Using the Slim Folio Pro keyboard, type in the numbers.
4. Press the ENTER key Now you're ready to type!
   

Note: If you want to use another iPad with this keyboard case, you will need to go through the pairing process again.

THREE USE MODES

Type mode

Fold the latch back until it magnetizes to the front of the case. Dock iPad in the upright position and type away.

Sketch mode

Lift iPad from magnetic dock and collapse into sketch mode. Since the keyboard is only on when iPad is in type mode, there is no need to worry about unintentional typing.

Read mode

Open the case and fold the keyboard back. The magnetic latch will keep the two sides of the case held together while you read. Since the keyboard is only on when iPad is in type mode, there is no need to worry about unintentional typing.

REMOVING YOUR IPAD

1. To detach your iPad from the case, lay it on a flat surface.
2. Push back the top corners of the case, one at a time, and then lift your iPad out of the cradle.

HOW TO STORE APPLE PENCIL (2ND GEN)

The sides of Slim Folio Pro are left open, so you can magnetically attach Apple Pencil (2nd gen) to the side of the iPad Pro while the case is on. There is also a slit on the inside of the Slim Folio Pro magnetic latch to keep Apple Pencil (2nd gen) secure in transit.

LED LIGHT INDICATORS

SHORTCUT KEYS

CHARGE THE BATTERY

To check battery life, press the battery check button If the status light is red, the keyboard needs to be charged Use a USB-C cable This is the same cable that is used to charge iPad Pro 11-inch and 12 9-inch (3rd generation).

1. Plug one end of the USB-C cable into the iPad charging port Plug the other end into a USB-C port on your computer or a wall power adaptor.
2. Charge the battery until the status light turns solid green.

BATTERY INFORMATION

• A fully charged battery provides about 3 months of use when the keyboard is used about two hours a day.
• Charge the battery if the status light turns red briefly after the keyboard turns on.
• The keyboard enters sleep mode automatically if not used for a while in the typing position Press any key to wake it.
• Once iPad is disconnected from magnetic dock, the keyboard will automatically shut off to save power.

BATTERY REMOVAL FOR RECYCLING

1. Pry off top cover of the keyboard with a screwdriver
   
2. Detach battery from circuit board and remove battery
   
3. Separate your product and battery from household Battery waste for recycling, where possible, according to local laws.
4. For more information, contact your local authority or place of purchase or visit www.logitech.com/recycling.

Documents / Resources

References

• Global Recycling Program for Ewaste and Batteries - Logitech

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Logitech SLIM FOLIO PRO - Keyboard Case for iPad Pro 11 Manual