Advertisement
USING YOUR KETTLE
PRELIMINARIES
Unpack your kettle and any accessories carefully. Retain the
packaging so that you can transport the appliance safely. If
you dispose of it please do so with regard to any recycling
regulations in your area.
Before using your kettle: Check that the voltage marked on
the rating plate under the kettle or the base matches your
mains voltage. Please read all the instructions in this User
Guide with particular reference to the safety notes.
OPERATION
Separate the kettle from the base. Ensure that the mains
socket is switched off at the wall. Lead the power cord out
through the recess in the base. Place the kettle base on a
stable level surface and connect the power cord to the wall
socket. Excess cord may be safely stowed by feeding it
carefully into the stowage compartment in the base. Ensure
the power cable exits the cut out slot otherwise the kettle base
will not be stable.
Pour away previously boiled water.
Push the lid release button to lift up the lid.
Fill the kettle with fresh water. The MIN and MAX marks are
located on the water scale . The water level must always
cover the MIN (0.5 litres) mark . Do NOT fill the kettle above
the MAX mark (1.7 litres) , or boiling water may be ejected.
Close the lid. Place the filled kettle correctly on the power
base.
Boiling the Kettle
Switch on the power at the wall socket.
The kettle ON/OFF switch is located below the handle. Press
5
Advertisement
