Location Requirements; Product Dimensions; Built-In Outdoor Side Burner Enclosure - KitchenAid 760-0023 Installation Instructions And Use & Care Manual

Built-in grill cabinet side burner
Table of Contents

Advertisement

Available languages

Available languages

Location Requirements

Select a location that provides minimum exposure to wind and
traffic paths. The location should be away from strong draft
areas.
Do not obstruct flow of combustion and ventilation air.
Clearance to combustible construction for burner:
A minimum of 36" (92 cm) must be maintained between
the front, sides and back of the burner and any
combustible construction.
A 36" (92 cm) minimum clearance must also be maintained
below the cooking surface, and the burner shall not be
used under overhead combustible construction.

Product Dimensions

Built-In Outdoor
Side Burner Enclosure
The enclosure opening for the built-in outdoor side searing
burner is to be a minimum of 11.5" (29.2 cm) wide x 16.75"
(42.7 cm) long x 7.3" (18.4 cm) deep.
This built-in outdoor side burner is only for installation in a built-
in enclosure constructed only of non-combustible materials.
Non-combustible materials could be brick, firewall or steel. Do
not use wood or other combustible materials for built-in
enclosure.
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

760-0023 lp770-0023770-0023 ng

Table of Contents