Sim Card Protection - Sony E2306 User Manual

Hide thumbs Also See for E2306:
Table of Contents

Advertisement

To remove a custom place
1
Make sure location mode is turned on and that you are using either the High
accuracy or Battery saving setting.
2
From your Home screen, tap
3
Find and tap Settings > Security > Smart Lock > Trusted places.
4
Select the place that you want to remove.
5
Tap Delete.
Keeping your device unlocked while you're carrying it
Using the On-body detection feature, you can keep your device unlocked while
you're carrying it in your hand or in a pocket or bag. The accelerometer in your device
keeps your device unlocked while it senses that it's being carried. The device locks
when the accelerometer detects that the device has been put down.
When you use the On-body detection feature, you need to be aware of the following
behaviours:
Any time you put your device down and it senses that it's no longer being carried, it
locks automatically.
The device can take up to one minute to lock.
After you get into a car, bus, train or other land vehicle, your device can take between
5 and 10 minutes to lock.
Note that when you get on an airplane or a boat (or another non-land based vehicle),
your device may not lock automatically, so make sure to lock it manually if needed.
When you pick up your device again or get out of the vehicle, just unlock it once and
your device then stays unlocked for as long as you have it on you.
The On-body detection feature can't distinguish whose body is connected. If you give your
device to someone else while it's unlocked using On-body detection, your device may stay
unlocked for the other user. Keep in mind that On-body detection as a security feature is less
secure than a pattern, PIN, or password.
To enable On-body detection
1
From your Home screen, tap
2
Find and tap Settings > Security > Smart Lock > On-body detection.
3
Drag the slider to the On position, then tap Continue.

SIM card protection

You can lock and unlock each SIM card that you use in your device with a PIN
(Personal Identification Number). When a SIM card is locked, the subscription linked
to the card is protected against misuse, meaning that you have to enter a PIN every
time you start your device.
If you enter the PIN incorrectly too many times, your SIM card will get blocked. You
then need to enter your PUK (Personal Unblocking Key) and a new PIN. Your PIN and
PUK are supplied by your network operator.
To set up a SIM card lock
1
From the Home screen, tap
2
Find and tap Settings > Security > Set up SIM card lock.
3
Drag the slider beside Lock SIM card to the On position.
4
Enter the SIM card PIN and tap OK. The SIM card lock is now active and you
will be prompted to enter this lock every time you restart the device.
To change the SIM card PIN
1
From the Home screen, tap
2
Find and tap Settings > Security > Set up SIM card lock.
3
Tap Change SIM PIN.
4
Enter the old SIM card PIN and tap OK.
5
Enter the new SIM card PIN and tap OK.
6
Re-type the new SIM card PIN and tap OK.
This is an internet version of this publication. © Print only for private use.
.
.
.
.
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

E2303Xperia m4 aquaE2353

Table of Contents