Thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
Wear protective
instruction
gloves
manual
1. sAFETY
1.1.
GENERAL sAFETY
locate the back panel in a suitable working area.
9
Keep the back panel clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the working area.
9
take care when assembling in case of sharp edges, wear protective gloves.
9
DO NOT use the back panel for any purpose other than that for which it is designed.
8
DO NOT get the back panel wet or use in damp or wet locations or areas where there is condensation.
8
DO NOT clean the back panel with any solvents which may damage the surface.
8
Note: the mounting of this product to the wall, will require assistance from another person.
2. iNTRODUCTiON
Modular storage system ideal for any garage or workshop. Can be easily adjusted and upgraded to suit specific needs. Purchase a
simple base cabinet or create a custom storage system.
standard features include:
• Ball bearing drawer slides throughout.
• Base cabinets are supplied with a worktop as standard.
• Floor cabinets feature adjustable shelves.
• Each unit is supplied with a lock and two keys.
• Supplied flat packed and will require some simple assembly.
• Two door floor and wall cabinets feature perforated pegboard panels on the inside of the doors.
3. sPECiFiCATiON
model no: ............................................................ APMS80BP
W x d x H: .................................................665 x 10 x 685mm
4. CONTENTs
© Jack sealey limited
instructions for
MODULAR BACK PANEL 665MM
model no:
x1
Original Language Version
APMs80BP
x4
APMS80BP | Issue:1 12/02/18