Yamaha Grizzly 450 2010 Owner's Manual page 132

mm (0.87 in) or less. If the specified free
play cannot be obtained or if distance B
exceeds 22 mm (0.87 in), have a Yamaha
dealer check the vehicle.
6. Tighten the brake cable adjuster locknut.
7. Slide the rubber cover to its original position.
8. Tighten the locknut at the brake lever.
Adjusting the brake pedal height
The top of the brake pedal should be positioned
75.0–85.0 mm (2.95–3.35 in) above the footboard
bracket. If the brake pedal height is incorrect, ad-
just it as follows.
8
1
1. Distance between brake pedal and footboard bracket
1. Remove the footboard by removing the bolts.
[ECB01150]
8-43
2
1
1. Footboard
2. Bolt
2. Loosen the locknut.
2
2