Wireless Settings - D-Link DHP-W611AV User Manual

Section 3 - Configuration
The DHP-W610AV lets you customize your wireless settings for your access point. This device allows you to extend your current network so you can
roam about the house while staying connected to the Internet. The following settings apply to both 2.4G and 5G modes.
WiFi Security You can choose to use WPA/WPA2 encryption or copy the
Mode: settings from your current router if you have a router that
supports Clone My Wi-Fi.
Wi-Fi Network The Service Set Identifier (SSID) is the name of your wireless
Name: network. Create a name using up to 32 characters. The SSID
is case-sensitive.
Enable Auto The auto channel selection setting can be selected to allow
Channel Scan: this device to choose the channel with the least amount of
interference.
Wireless Channel: By default the channel is set to 1. The channel can be changed
to match the channel setting for an existing wireless network
or to customize the wireless network. If you enable Auto
Channel Scan, this option will be greyed out.
WPA/WPA2 Use of TKIP/AES security framework provides the optimum
Network Key: mix of security and compatibility. Choose a password that
is strong. A good password uses both letters and numbers
in unpredictable places. Example bad passwords could be
password or 12345678.
Click Save Settings for the changes to take effect.
D-Link DHP-W611AV User Manual

Wireless Settings

15