Table of Contents
Advertisement
R911299722 / 02 | Rexroth IndraControl VCP 20
System Presentation
1
System Presentation
1.1
Brief Description of the VCP 20
1.2
Operating System
Electric Drives and Controls | Bosch Rexroth AG
The small operator terminal VCP 20 is a machine operator terminal
which can initiate functions in the machine as defined in the applica-
tion.
Special features of the VCP 20 are its compact design and the seal
running around the rear. Thus, it is suitable for various applications.
Furthermore, every mounting position is possible.
Depending on the variant, the small operator terminal is equipped
either with three serial standard interfaces or with a field bus interface.
The front panel with short-stroke keyboard consists of a 3 mm alumin-
ium plate with tapered edges and is covered by a chemical resistive
Polyester foil with embossed key areas.
Fig. 1-1: VCP 20 with keyboard
A special operating system is installed on the small operator terminal. If
necessary, this operating system can be reloaded into the device (firm-
ware download). This can be done with the associated programming
software "VI Composer".
1-1
Advertisement
Table of Contents
