Electrical Connection - Bosch WAP24200TC Use And Care Manual

Electrical connection

WARNING
9
ELECTRICAL SHOCK
Improper connection of the ground may result in
electric shock. Have the appliance checked by a
qualified technician or licensed electrician if you are
in doubt as to whether the washer has been
properly grounded.
WARNING
9
ELECTRICAL SHOCK
To reduce the risk of fire or electrical shock, DO
NOT use an extension cord or an adapter to
connect the washing machine to the power supply.
WARNING
9
ELECTRICAL SHOCK
To reduce the risk of electrical shock:
Only pull out the main cable by the plug and
▯
never by the cable, as this could damage it.
Never touch or hold the main plug with wet
▯
hands.
Never unplug the main plug during operation.
▯
Grounding Instructions
This appliance must be grounded. In the event of
malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance
for the electric current. This appliance is equipped with a
cord that has an equipment grounding conductor and a
grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded
in accordance with all local codes and ordinances.
Important Points
Do not modify the plug provided with the appliance. If
▯
the plug will not fit into the outlet have a properly
grounded outlet installed by a qualified electrician. Do
not cut, remove or bypass the grounding prong on the
washer power cord plug.
The washer power cord plug must be easily
▯
accessible when the washer is operating.
When unplugging or plugging in the washer power
▯
cord, grasp the plug. Do not pull on the power cord to
unplug the washer.
The household electrical supply must be suitable for
▯
the voltage specification shown on the washer rating
plate (located inside the washer door, immediately
below the drum opening).
~ Purchase information; Page 4
See the table below for connection specfications and
fuse/breaker requirements.
Volts Hertz
220 60
The wiring for the electrical outlet circuit must be
▯
sufficient to meet the appliance requirements.
Protect the power cord from physical damage, such as
▯
being twisted, kinked, pinched, caught in a door, or
walked upon.
If the power cord is damaged, it must be replaced by a
▯
qualified person to avoid a fire/shock hazard.
Replacement power cords are available through
Customer Service.
~ Customer service; Page 4
The washing machine must only be connected to an
▯
individual branch circuit via a socket which has been
properly installed and grounded.
Make sure that:
▯
- the power plug fits into the socket
- the wire size is sufficient
- the grounding system is properly installed:
The power cord may be replaced by an qualified
▯
person only. Replacement power cords are available
from Customer Service. To reduce the risk of fire or
electrical shock, DO NOT use an extension cord or an
adapter to connect the washing machine to the power
supply. If a ground fault circuit breaker is to be used,
only use the types marked with the following symbol:
. Only this symbol can guarantee compliance with
z
all current regulations.
Watts
2.400
15