Whirlpool WCD5090JW Quick Start Manual

Cycles
WARNING
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Do not dry items containing foam, rubber, or plastic in
this dryer.
Doing so can result in death or fire.
OPTIONS
• Cycle Signal, Control Lock, and Delay Start
can be selected with all cycles.
Other Options
Save Time provides quicker drying.
Gentle dries at a reduced
temperature for more delicate
fabrics.
Wrinkle Shield option avoids
™
creasing by tumbling the load after
the cycle ends.
RINSE CONDENSER ONCE A MONTH
EMPTY WATER TANK BEFORE
EVERY CYCLE
NOTE 1: These clothes dryer's Government energy certifications were based on the Normal Cycle, Nonadjustable
Temperature Setting and Normal Dryness Level. The as-shipped default of Wrinkle Shield off, was used.
NOTE 2: See "Program/Cycle Guide" in the Owner's Manual for more information about cycles, settings, and
options. Not all settings and options are available on each cycle. Read your Owner's Manual before using your dryer.
W11564196A
Quick Start Guide
Using Your Compact Dryer
Options Settings Other Options
CLEAN BOTTOM FILTER EVERY
5 CYCLES
Some small amount of water will be
present when the filter is removed.
USE KNOB TO SELECT OPTION/
SETTING/CYCLE AND PRESS
TO ADVANCE
CYCLES AND SETTINGS
• Each cycle has default time and
dryness level settings. To use these
settings, simply touch the Start/
Pause button to begin drying.
• To modify drying time for the Timed
Dry cycles, select the Timed Dry
setting.
• For all other cycles, you can modify
the dryness level by selecting the
Dryness Level setting.
First Time Use
Press the power button to turn on the dryer. The control panel
will show the SET LANGUAGE menu. Press the knob to activate
the language choices. Turn the knob to display your preferred
language and then press the knob to select the language. The
control panel will then display the REMEMBER LAST USED
CYCLE menu. Press the knob to activate the selection choices.
Turn the knob to highlight either ON or OFF (Selecting OFF on
the REMEMBER LAST USED CYCLE setting will allow the
Normal Cycle (Government energy certification cycle) to always
be displayed when powering on the unit. The manufacturer
recommendation is to use this default setting.) and then press
the knob to select the choice. The control panel will display
SET-UP COMPLETE.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in death,
explosion, or fire.
CLEAN LINT SCREEN BEFORE
EVERY CYCLE
TOUCH AND HOLD POWER
TO TURN ON DRYER
TOUCH START/PAUSE
TO BEGIN CYCLE
LED INDICATORS
Water tank full.
Clean bottom filter.
Check bottom filter.
Clean door filter.
Start Delay Activated.
Timed Dry Activated.