Download Print this page
NEC Express5800/R120h-1E Manual

NEC Express5800/R120h-1E Manual

Hide thumbs Also See for Express5800/R120h-1E:

Advertisement

Quick Links

Express5800/R120h-1E,R120h-2E ご使用時の注意事項
このたびは弊社製品をお買い上げいただき、誠にありがとうございます。
本製品のご使用において、ご注意いただくことがあります。誠におそれ入りますが、ご使用前に下記内容を必ず
ご一読ください。
なお、本書は必要なときにすぐに参照できるよう大切に保管してください。
1) はじめに
2) システムROMの機能に関する注意事項
3) iLO 5の機能に関する注意事項
4) OSに関する注意事項
5) 全般の機能に関わる注意事項
A) ファームウェア変更に伴う変更点
B) 誤記訂正
1) はじめに
● 本製品のマニュアルについて
本製品に関する詳細は、以下の Web サイトに掲載しているマニュアルに記載しています。
https://www.support.nec.co.jp/
「NEC サポートポータル内検索」より、以下の ID で検索してください。
R120h-1E : 3170101982
R120h-2E : 3170101983
また、ESMPRO/ServerManager、ESMPRO/ServerAgentService、エクスプレス通報サービス/エクスプレス通報
サービス(HTTPS)/エクスプレス通報サービス(MG)に関しては、
ESMPRO 日本語ポータルサイト<https://jpn.nec.com/esmsm/>
NEC サポートポータル<https://www.support.nec.co.jp/View.aspx?id=9010102124>
の最新の情報およびバージョンをご確認のうえ、ご利用ください。
● Starter Packについて
本製品で使用する Starter Pack は、以下の Web サイトに最新版が掲載されています。
Web サイトに掲載されている内容を確認し、バージョン S8.10-007.02 以上を適用してください。
https://www.support.nec.co.jp/
(「NEC サポートポータル内検索」より、「S8.10-007」を検索)
● VMware ESXiのドライバ・サービスモジュールについて
本製品で使用する VMware ESXi のドライバ・サービスモジュールは、以下の Web サイトに最新版が掲載されて
います。Web サイトに掲載されている内容を確認し、適切なバージョンを適用してください。
(1) Agentless Management Service および iLO Channel Interface Driver
https://www.support.nec.co.jp/
(「NEC サポートポータル内検索」より、 「Agentless Management Service」を検索し、 【最新版】と表示され
る「Agentless Management Service および iLO Channel Interface Driver (VMware ESXi 6.x 版(x=0,5 また
は 7))」を適用してください)
(2) WBEM プロバイダおよび CLI ツール
https://www.support.nec.co.jp/
(「NEC サポートポータル内検索」より、 「WBEM プロバイダ」を検索し、 「 【最新版】WBEM プロバイダおよび
CLI ツール(VMware ESXi 6.x 版(x=0,5 または 7))」を適用してください)
(3) VMware ESXi デバイスドライバ
https://www.support.nec.co.jp/View.aspx?id=3140105866
(「PC サーバ/ブレードサーバ(Express5800 シリーズ)」から対象 OS の「デバイスドライバ一覧」を選択)
1

Advertisement

loading

Summary of Contents for NEC Express5800/R120h-1E

  • Page 1 る「Agentless Management Service および iLO Channel Interface Driver (VMware ESXi 6.x 版(x=0,5 また は 7))」を適用してください) (2) WBEM プロバイダおよび CLI ツール https://www.support.nec.co.jp/ (「NEC サポートポータル内検索」より、 「WBEM プロバイダ」を検索し、 「 【最新版】WBEM プロバイダおよび CLI ツール(VMware ESXi 6.x 版(x=0,5 または 7))」を適用してください) (3) VMware ESXi デバイスドライバ https://www.support.nec.co.jp/View.aspx?id=3140105866...
  • Page 2 ● 本製品の保守作業時間に関して 本製品は、障害発生時等に伴う保守作業に際し、保守部材と搭載ファームウェア、ドライバの組み合わせによ っては、保守作業に時間を要することがあります。 2) システムROMの機能に関する注意事項 ● Submit Fail For FormのQuestion(質問)ポップアップ表示についての注意事項 システムユーティリティにおいて設定の変更中に、次のSubmit Fail For FormのQuestion(質問)ポップアップが 表示された場合は、「キャンセル」を選択して変更を破棄してください。 さらに、サーバーの再起動を行ってシステムユーティリティに入りなおしてから設定の変更を再度行って ください。もし「OK」を押してそのまま設定変更を進めると、装置に記録されているSerial Number、Product ID などの設定情報を消失することがあります。 英語表示の場合 日本語表示の場合 ● 「Memory Initialization Start」のメッセージでPOST停止した場合の対処について 「Memory Initialization Start」のメッセージで POST 停止した場合、システムメンテナンススイッチの SW6 に よりシステム設定をデフォルト値に戻すことで復旧することができます。 詳細な手順は、メンテナンスガイド「1 章(7.3.3 システム設定をデフォルト値に戻す)」の項をご参照くださ い。 ● シリアルコンソールにPOSTデバッグ情報が出力される件について システム...
  • Page 3 ● Server Configuration Lock(SCL)についての注意事項 (1) システム運用中は SCL 機能を無効にし、使用しないでください。 (2) SCL 機能有効時に設定するパスワードは大切に保管してください。SCL のパスワードを紛失した状態で、SCL 機能によりロック(OS ブート前に停止)されると、ロック解除できず、二度とブートできなくなります。 ブート可能状態への復旧/回復は有償にて承ることになります。 なお、SCL のパスワードを紛失した場合、SCL のパスワードをクリアする方法はありません。 (3) 保守を依頼する際は、SCL 機能を無効化していただく必要があります。 SCL 機能を無効にできない場合、保守は有償にて承ることになります。 (4) RBSU の「Halt on Server Configuration Lock failure detection.」機能は有効化しないでください。もし有 効に設定した場合、SCL 機能が回復不能条件の該当を検出し、ロック(OS ブート前に停止)されてしまうと、 システムユーティリティも起動できず、二度とサーバー構成ロックを無効にすることができません。 ブート可能状態への復旧/回復は有償にて承ることになります。 SCL 機能の回復不能条件 - RBSU の設定変更によりロックされた場合 - ファームウェア更新によりロックされ、元のファームウェア...
  • Page 4 ● フォールトトレラントメモリ機能(ADDDC) の仕様変更について 本製品の搭載ファームウェアの更新に伴い、フォールトトレラントメモリ機能(ADDDC)の仕様に変更があり ます。下記、変更点を記載します。 - システムROMのバージョンがv2.00 (02/02/2019)以降、CPUあたりDIMM 8枚、もしくはDIMM 12枚以外の構成で あっても、フォールトトレラントメモリ機能(ADDDC)が使用できる構成であれば、本機は自動的に設定が 変更し、同機能の使用を始めます。 - システムROMのバージョンがv2.10 (05/21/2019)以降、各チャネルあたりのRANK数の合計が2以上になるよう に メ モ リ を 搭 載 し な く て も 、 フ ォ ー ル ト ト レ ラ ン ト メ モ リ 機 能 ( A D D D C ) は 利 用 で き ま す 。 - システムROMのバージョンがv2.10 (05/21/2019)以降、フォールトトレラントメモリ機能(ADDDC)が使用可能...
  • Page 5 ● システムユーティリティおよびワンタイムブートメニューの表示について (1) BMC Configuration Utility 配下のメニューの変更権限については、BMC Configuration Utility > Setting Option > Require user login and configuration privilege for BMC Configuration を有効にすることで保 護してください。 BIOS/Platform configuration (RBSU) > Server Security > Set Admin Password の設定では保護されません。 (2) System Information > Processor Informationで表示されるL2 Cache、L3 Cacheの Maximum Size、Installed Sizeは1MBを1024000バイトに換算した数値で表示されます。...
  • Page 6 3) iLO 5の機能に関する注意事項 ● iLOの再起動を行う場合の注意事項 サーバー起動からOSの起動完了までの間(POST (Power On Self Test)実行中も含みます)は、iLOの再起動を 行わないでください。 また、システムユーティリティの操作途中も、iLOの再起動を行わないでください。 該当タイミングでiLOの再起動を行うと、期待しない動作となる場合があります。 たとえばシステムユーティリティの設定変更途中にiLOの再起動(※)を行うと、直後のシステム再起動処理 (Reboot)が正常に動作しない場合や、装置に記録されているSerial Number、Product IDなどの設定情報を消失 することがあります。また、POST (Power On Self Test)実行中にiLOの再起動を行うと、iLO Webインター フェース:[Information] – [Overview]ページにおけるUUID、UUID(論理)が不正な表示になる場合があります。 不正な表示となった場合は、本体装置の電源をオフ、オンしてください。 <対象となるiLOの再起動の方法> - iLO Webインターフェースなどを利用したネットワーク経由でのiLOの再起動。 - UIDスイッチを使用したiLOの再起動。 ※ システムユーティリティの「BMC Configuration Utility」での設定変更後のiLOの再起動については、本書 の「システムユーティリティの「BMC Configuration Utility」の操作についての注意事項」を参照して 操作してください。...
  • Page 7 ● システムユーティリティより、Admin Passwordを設定(※1)した場合や、iLO Webインターフェースから、[ホスト 認証が必要]設定を有効(※2)に設定した場合の注意事項 (※1) iLO 5 ファームウェアバージョン:1.43 未満を適用した環境の場合が対象となります。 [System Configuration] – [BIOS/Platform Configuration (RBSU)] – [Server Security]より、Set Admin Password オプションにてパスワードを設定する。 (※2) iLO ファームウェアバージョン:1.40 以上を適用した環境の場合が対象となります。 [Security] – [Access Setting] – [iLO]にある[ホスト認証が必要/Require Host Authentication]を 『有効』に設定する。 設定を行った場合、次に示す状況が発生します。 ・アラートビューアに、 “Remote Insight/Integrated Lights-Out 認証されないログイン試行検出”の メッセージが多数表示されます。...
  • Page 8 ● Windows上でのvEthernet (Hyper-V Virtual Ethernet Adapter)構成時のiLO Webインターフェースのネットワーク アダプタのIPv6アドレス表示に関する注意事項 iLO 5ファームウェア:2.10以上 2.18以下をご使用の場合、Windows OS上でvEthernet (Hyper-V Virtual Ethernet Adapter)が構成されている場合、iLO Webインターフェースの[Information] - [Network] - [Physical Network Adapters]において、構成されている各[Adapter]の[Network Ports]の”IPv6 Address”において正しいIPv6アドレ スが表示されない場合があります。 vEthernet構成時のIPv6アドレスに関しては、 OS上のネッワークアダプタのプ ロパティにてご確認ください。 ● iLO WebインターフェースのDevice Inventory情報の表示について <R120h-1E LOMカード(N8104-193/194/195)構成時> システムROMのバージョン2.34 (04/08/2020)以下をご使用の場合、iLO Webインターフェースの[Information] - [Device Inventory]において、LOMカードの表示情報が以下のように表示される場合がありますが、サーバの運 用およびLOMカードの動作に影響はありません。...
  • Page 9 英語表示の場合 ● 物理ドライブのステータス変更時のSNMPトラップ通知のロケーション情報欠損に関する対処について 物理ドライブのステータス変更時のSNMPトラップ通知において、ロケーション情報が欠損する場合があります。 ロケーション情報に関しては、 iLO5 webインターフェースの[情報]-[インテグレーテッドマネジメントログ]で同 じイベントのロケーション情報をご確認ください。 例: Abnormal, physical drive status change detection,iLO SNMP Trap,mgr_WIN-U6HIHPNIH1Q,uru-rhel83,192.168.0.57,,2021/10/01 15:22:57,iLO,0xc0000be6,"A physical drive status change has been detected. Current status is 3. (Location: ot 12 Controller: Slot 12)","If the physical drive status is 'failed(3)', 'predictiveFailure(4)', ●...
  • Page 10 ○ ESXi6.5/6.7の場合 以下のコマンドを実行します。 # /etc/init.d/amsd.sh restart もしくは # /etc/init.d/ams.sh restart ※ お使いのAMSバージョンによりコマンドが異なります。 ○ ESXi7.0の場合 以下のコマンドを実行します。 # /etc/init.d/amsd restart ● iLO5 Ver2.65以降の注意点 iLOwebインターフェースの「システム情報」>「デバイスインベントリ」で BackPlane(BP)の位置情報が不正にな る場合がありますが表示だけの問題で動作に影響はありません。 正常時)Slot=#:Port=#I:Box=# ※#は接続先により番号が変わります。 不正時)Slot=#:Port=?I:Box=? 数字の部分が?と表示されます。 または Box=# Box のみ表示されます。 4) OSに関する注意事項 ● EXPRESSBUILDERでのWindows「手動」インストールについて EXPRESSBUILDER から Windows をインストールするとき、 「手動」オプションを選択した場合であっても、 インストール先ディスクのパーティションがすべてクリアされます。再インストール時、ユーザーデータが...
  • Page 11 ◆Agentless Management Service (AMS) 1.40.0.0を使用される場合は、一度以下の手順を実施することで ハンドル数は増加しなくなります。 (1) 以下のコマンドをコマンドプロンプトで実行してAMSを停止します。 >net stop ams (2) "C:\Program Files\OEM\AMS\Service"ディレクトリをエクスプローラで開きます。 (3) "storelib.dll"のファイル名を"storelib.dll.bak"に変更します。 (4) 以下のコマンドをコマンドプロンプトで実行してAMSを開始します。 >net start ams (※1) AMS停止時に以下のメッセージが表示されることがありますが問題ありません。 Agentless Management Service サービスを停止中です.. システム エラーが発生しました。 システム エラー 1067が発生しました。 プロセスを途中で強制終了しました。 Agentless Management Service サービスは正常に停止されました。 (※2) AMS起動時に以下のメッセージが表示されることがありますが問題ありません。 要求したサービスは既に開始されています。 ◆Agentless Management Service (AMS)のバージョンの確認方法には以下の2つの方法があります。...
  • Page 12 6.47 未満 ファームウェアアップデートにともない追加されたハード ウェアの障害がアラートビューアに表示されない、もしくは "不明タイプ" のアラートとして表示される ◆ESMPRO/ServerManager Ver.6 (Windows 版)のアップデート方法 (1) 以下の Web サイトより最新版の ESMPRO/ServerManager をダウンロードします。 https://www.support.nec.co.jp/View.aspx?id=9010103524 (2)「ESMPRO/ServerManager Ver.6 インストレーションガイド(Windows 編)」の「2 章 インストール」を参照 して ESMPRO/ServerManager をアップデートします。 ◆ESMPRO/ServerManager Ver.7 (Windows 版)へのアップデート方法 (1) 以下の Web サイトより ESMPRO Platform Management Kit をダウンロードします。 https://www.support.nec.co.jp/View.aspx?id=9010109532 ESMPRO/ServerManager Ver.7 は...
  • Page 13 ESMPRO/ServerManager がアップデートされていないときは、上記 と同様に追加されたハードウェア障害の検知および通報ができ ※iLO 管理機能向け ない。 の受信情報設定 ファイルは 2 種類 あります。 ◆iLO 管理機能向けの受信情報設定ファイルのアップデート方法 (1) 以下の Web サイトより最新版の受信情報設定ファイル(ilo_jp.mtb、iml_jp.mtd)をダウンロードします。 https://www.support.nec.co.jp/View.aspx?id=9010100096 ilo_jp.mtb、iml_jp.mtd は MGMTB.zip に包含しています。 (2) 「エクスプレス通報サービス(MG) インストレーションガイド(Windows 編)」の「3.1.5 受信情報の設定」 または「3.2.4 受信情報の設定」を参照して受信情報の設定画面で登録済みの受信情報を削除します。 (3) (1)でダウンロードした最新版の受信情報設定ファイルを登録します。 「エクスプレス通報サービス(MG) インストレーションガイド(Windows 編)」は以下の Web サイトから ダウンロードしてください。 https://www.support.nec.co.jp/View.aspx?id=9010102124 ◆iLO ファームウェアのバージョン確認方法...
  • Page 14 (2) システム ROM のバージョンが v2.16 (05/25/2020)以前の場合、非冗長 FAN 構成において ESXi 起動完了後、 下記のセンサーの健全性(vCenter:ステータス)の表示が『警告(黄色)』となる場合がありますが、ハー ドウェアの故障を示すものではなく運用に影響ありませんので、そのまま運用いただけます。 - Cooling Unit 1 Fans (3) ESXi 起動完了後、下記のセンサーの健全性(vCenter:ステータス)の表示が『?』となる場合があります が、ハードウェアの故障を示すものではなく運用に影響ありませんので、そのまま運用いただけます。 - System Chassis 1 UID ● RAID監視通報方式の変更について VMware ESXi において、N8103-189/190/191/192/193/194/195/196/201/237/238 RAID コントローラと N8103-239 OS ブート専用 SSD ボードをご使用されている場合、RAID 監視通報は SNMP Trap による通報に変更になります。 詳細は、下記の Web サイトをご確認ください。 ・NEC サポートポータル https://www.support.nec.co.jp/View.aspx?&id=3140108419...
  • Page 15 5) 全般の機能に関わる注意事項 ● システムユーティリティの「BMC Configuration Utility」の操作についての注意事項 システムユーティリティの「BMC Configuration Utility」での操作において、以下の(1)のポップアップが表示 された場合は(2)以降の手順を厳守してください。 注意事項に従った操作を実施されない場合、「Memory Initialization Start」のメッセージでPOST停止、あるい は、装置に記録されているSerial Number、Product IDの消失が発生する場合があります。 (1) システムユーティリティの「BMC Configuration Utility」において設定の変更を行うと、iLOの再起動を行う ために、次のWarning (注意)ポップ アップが表示されることがあります。 英語表示の場合 日本語表示の場合 (2) 「OK」を押して進めます。 (3) 次のWarning (注意)ポップアップが表示されます。 このWarning (注意)ポップアップが表示されている状態にて、必ず1分以上お待ちください。 その間、何も操作しないでください。 英語表示の場合 日本語表示の場合 (次ページへ続く)
  • Page 16 (4) 1分以上経過後、装置前面のステータスランプが緑色で点灯していることを確認してください。 ※ iLOが再起動中 :ステータスランプが緑色で点滅(毎秒1回) iLOの再起動が完了し正常動作:ステータスランプが緑色で点灯 (5) 再起動の完了が確認できたら、「OK」を押してください。 (6) <ESC>キーを複数回押してシステムユーティリティの画面に戻ります。 (7) システムユーティリティの「Reboot the System」を選択して再起動します。 ● Serial Number、Product ID が消失された場合の対処について Serial Number、Product IDが消失された場合、以下の手順にて復旧することができます。 (1) 装置の電源を切り、電源コードをコンセントから外します。 (2) 30秒以上経過したのち、電源コードをコンセントに接続します。 (3) POWERスイッチで装置の電源をONにします。 (4) サーバーが起動し、POST画面が表示されます。 (5) <F9>キーを押してシステムユーティリティを起動します。もし、システムユーティリティが起動できない 状態になっている場合は、「1章(7.3.3 システム設定をデフォルト値に戻す)」を参照し、システムメンテ ナンススイッチを操作して、RBSU設定の初期化をします。 (6) システムユーティリティの「System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options >...
  • Page 17 HPE Smart Array Controllers and HPE HBA Controllers (firmware-smartarray2de15b6882-5.08-1.1x86_64) 詳細につきましては、以下の Web サイトに掲載されている内容を確認してください。 [Starter Pack Version S8.10-009.01] https://www.support.nec.co.jp/ (「NEC サポートポータル内検索」より、 「S8.10-009」を検索) ● 増設リアドライブケージ(N8154-107/120) ご使用時の注意事項 本製品と、増設リアドライブケージ(N8154-107/120)を使用する場合は、以下の設定を変更してください。 ◆設定手順 System Configuration > BIOS/Platform Configuration (RBSU) >Advanced Options > Fan and Thermal Options > Thermal Configuration を「Increased Cooling」に設定してください。...
  • Page 18 EXPRESSBUILDER のヘルプとメンテナンスガイドで記述が異なる場合は、メンテナンスガイドの記載を優先して ください。 ● サーバ診断カルテについて サーバ診断カルテは、対象製品の稼働状況を記録し、月ごとに稼働状態の診断カルテを提供するサービスです。 サーバ診断カルテの詳細は、Starter Pack内の「サーバ診断カルテ セットアップガイド」を参照してください。 ● LOM カード(N8104-173/177) FCoE 機能のサポートについて 本製品では FCoE (FibreChannel over Ethernet)機能を NEC としてサポートしておりません。 N8104-173 では LOM カードに適用されているファームウェアバージョンに関わらず、N8104-177 では Family Firmware Version 8.35.43 以降で FCoE 機能が有効化されています。 OS 上で FCoE デバイスとして認識されますが、OS やドライバで機能利用の設定をしないことで、運用上の影響 はありません。 以下のデバイスの検出は無視していただいて構いません。...
  • Page 19 (2) Diagnostics Optionsメニュー システムユーティリティから、「System Configuration > BIOS/Platform Configuration (RBSU) > System Options > 「Diagnostics Options」を選択すると、「Diagnostics Options」メニューが表示されます。 追加のオプションについて、次の表を参照してください。 項目 パラメーター 説明 Embedded Diagnostics [Enabled] 本機ではサポートされません。 Disabled ]: 出荷時の設定 (3) Memory Optionsメニュー システムユーティリティから、 「System Configuration > BIOS/Platform Configuration (RBSU) > Memory Options」 を選択すると、「Memory Options」メニューが表示されます。...
  • Page 20 (5) Advanced Performance Tuning Options サブメニュー システムユーティリティから、「System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options > Advanced Performance Tuning Options」を選択すると、「Advanced Performance Tuning Options」メニューが表示されます。 追加のオプションについて、次の表を参照してください。 項目 パラメーター 説明 Processor Jitter Optimized for Throughput 本オプションは指定ある場合をのぞいて、出荷時設 Control Optimization Optimized for Latency 定から変更しないでください。...
  • Page 21 (7) PCIe Devices Configurationメニュー システムユーティリティから、「System Configuration > BIOS/Platform Configuration (RBSU) > PCIe Devices Configuration」を選択すると、「PCIe Devices Configuration」メニューが表示されます。 追加のオプションについて、次の表を参照してください。 項目 パラメーター 説明 Advanced PCIe Configuration (a) Advanced PCIe Configurationメニュー システムユーティリティから、「System Configuration > BIOS/Platform Configuration (RBSU) > PCIe Devices Configuration > Advanced PCIe Configuration」を選択すると、「Advanced PCIe Configuration」メニューが表 示されます。...
  • Page 22 (8) Fan and Thermal Optionsメニュー システムユーティリティから、 「System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options > Fan and Thermal Options」を選択すると、「Fan and Thermal Options」メニューが表示されます。 オプションのパラメーター追加について、次の表を参照してください。 項目 パラメーター 説明 Thermal Configuration [Optimal Cooling] 本機のファン冷却方法を選択します。 「Optimal Cooling」は、適切な冷却を可能にする必 Increased Cooling Maximum Cooling 要最小限のファン速度に設定することで、最も効率 Enhanced CPU Cooling 的な冷却方法を実現します。...
  • Page 23 B) 誤記訂正 ユーザーズガイドに誤記がありましたので、以下に訂正いたします。 ■ Express5800/R120h-1E ユーザーズガイドについて 誤 正 電子版としてStarter Pack DVD に格納、 電子版としてWeb サイト 本製品の説明書 またはWeb サイト(http://jpn.nec.com/)に (https://jpn.nec.com/express/)に公開 公開 P.24 POWER スイッチマスク 非対応 3.特長 - 豊富な機能搭載 P.32 (3)マイクロSDカードスロット (3)マイクロSDカードスロット(未サポー 5.5 マザーボード ト) P.110 光ディスクドライブケーブルキット 不要(光ディスクドライブに添付) 1.18 4x 3.5 型 光デ...
  • Page 24 - メモリ関連 Protection]を設定してください てください - メモリRAS機能を使う P.191 2x データLAN コネクタ (1000BASE- 2x データLAN コネクタ (1000BASE-T対応 1.仕様 T/100BASE-TX/10BASE-T対応(RJ-45)) (RJ-45)) 標準インターフェ ース ■ Express5800/R120h-1E,R120h-2E インストレーションガイド(Windows編)について 誤 正 電子版としてStarter Pack DVDに格納、 電子版としてWeb サイト 本製品の説明書 またはWeb サイト(http://jpn.nec.com/)に (https://jpn.nec.com/express/)に公開 公開 Windows Server 2016 Essentials 非対応 オペレーティングシ...
  • Page 25 ■ Express5800/R120h-1E,R120h-2E メンテナンスガイドについて 誤 正 電子版としてStarter Pack DVD に格納、 電子版としてWeb サイト 本製品の説明書 またはWeb サイト(http://jpn.nec.com/) (https://jpn.nec.com/express/)に公開 に公開 Windows Server 2016 Essentials 非対応 オペレーティングシ ステムの表記 (Windows) P.71 6. 本書の「1 章(7.3.2 システムメンテナ 6. 本書の「1 章(7.3.2 システムメンテナ 7.3.3 システム設定 ンススイッチの操作)」 に従い、 システムメ ンススイッチの操作)」 に従い、 システムメ...
  • Page 26 ■ メモリ搭載順序の訂正 ユーザーズガイドにおいて、メモリの搭載順序に誤記がありました。 ついては、下記のとおり訂正いたします。 修正箇所 ・Express5800/R120h-1E ユーザーズガイド 2章 準備 1.8 DIMM 1.8.2 DIMMの増設順序 ・Express5800/R120h-2E ユーザーズガイド 2章 準備 1.9 DIMM 1.9.2 DIMMの増設順序 メモリの搭載順序について メモリの搭載位置、搭載順序は 1CPU 構成と 2CPU 構成、また、メモリの搭載枚数によって異なります。 ・CPU1 だけ実装している場合のメモリ搭載位置、搭載順序 DIMM スロット番号 DIMM 1枚 メ モ DIMM 2枚 リ 搭 DIMM 3枚...
  • Page 27 ■ 本件に関するお問い合わせについて 本書の内容に不明点がありました場合は、下記ファーストコンタクトセンターまでお問い合わせください。 お問い合わせ先:ファーストコンタクトセンター TEL :0120-5800-72 受付時間 :9:00~12:00 13:00~17:00 月曜日~金曜日(祝日を除く) ※番号をお間違えにならないようお確かめのうえお問い合わせください。 2022年 6月 第17版...
  • Page 28 -> Document & Software -> Rack -> (Select your server model) Please check latest information and versions on ESMPRO portal site before using NEC ESMPRO Manager, NEC ESMPRO ServerAgentService and Express Report Service / Express Report Service (HTTPS) / Express Report Service (MG).
  • Page 29 2) Notice about the function of the System ROM ● Caution for the “Submit Fail For Form” Question pop-up If you encounter the “Submit Fail For Form” Question pop-up while changing the configuration in the System Utilities, discard the changes by pressing Cancel. To apply the desired changes after that, reboot the server and re-enter the System Utilities.
  • Page 30 ● Notes on the Server Configuration Lock (SCL) (1) Set SCL function to disabled and operate the system. (2) Set the password when the SCL function is enabled and keep the password in a safe place. If you lose your SCL password and it is locked by the SCL function (stopped before booting the OS), you will not be able to unlock it and you will not be able to boot the server OS again.
  • Page 31 ● "IPMI Watchdog Timer Timeout" may be logged in the iLO event log (IEL) When System ROM is v2.62 (03/08/2022) and the IPMI Watchdog Timer option is set to Disabled (factory setting), the following "IPMI Watchdog Timer Timeout" may be logged in the IEL: iLO IPMI Watchdog Timer Timeout: Action: None, TimerUse: 0x44, TimerActions: 0x00.
  • Page 32 *1 : System Configuration > BIOS/Platform Configuration(RBSU) > PCIe Device Configuration > Advanced PCIe Configuration > PCIe MCTP Options *2 : *3 : ● About set value of Extended Memory Test option When System ROM Version is v2.36 (07/16/2020), Extended Memory Test option is set to "Disabled" automatically after a system reboot.
  • Page 33 ● Caution about iLO Downgrade Policy In case that iLO License for Remote Management is installed with iLO5 firmware 1.40 or latest, Do NOT set “Permanently disallow downgrades” in [ Security] - [Access Setting] - [Update Service] - [Downgrade Policy] setting. If the setting “Permanently disallow downgrades”...
  • Page 34 ● Caution about Virtual NIC settings on iLO Web interface The default value for “Virtual NIC” in [Security]-[iLO] depends on the version of the iLO 5 firmware. Check the following when "Set to factory default" is executed in the BMC configuration utility. (1) If you use iLO 5 firmware version between 2.10 and 2.18, The default value of “Virtual NIC”...
  • Page 35 ● Displaying Device Inventory information in the iLO web interface < Enviroment with R120h-1E has LOM card (N8104-193/194/195) > System ROM version lower than v2.34(04/08/2020), LOM card’s information might be displayed as follows, but it does not affect server operation and LOM card operation. :Unspecified - Location :N/A...
  • Page 36 4) Notice about the OS ● About EXPRESSBUILDER Manual Installation Partitions in the target disk are deleted when you install the Windows by EXPRESSBUILDER even if you select the "Manual" option. Pay attention to the user data stored in the system drive when re-installing Windows. ●...
  • Page 37 >Start DEVMGMT.MSC When you refer to network of NEC ESMPRO Manager, a duplicate network card will be displayed after the configuration of the expanded CPU board is changed CPU processor kit. Please ignore the network device that is not displayed on the...
  • Page 38 “ESMPRO/ServerManager. (4) Click on "ESMPRO/ServerManager Ver.7.00 Installation Guide (Windows)". (5) For more details on “Update NEC ESMPRO Manager from Ver 6 to Ver 7”, refer to Chapter 2 Installation in "NEC ESMPRO Manager Ver. 7 Installation Guide (Windows) [PDF]". ◆Phenomena regarding iLO Receiving Information (ilo_en.mtb)
  • Page 39 ◆The steps of confirming version for NEC ESMPRO Manager (Windows) (1) Log in NEC ESMPRO Manager. (2) Click the "About NEC ESMPRO Manager" link at the top right of the screen. (3) Confirm the version information of NEC ESMPRO Manager.
  • Page 40 If VMware ESXi uses N8103-189/190/191/192/193/194/195/196/201/237/238 RAID controller and N8103-239 SSD Adapter for OS Boot, the RAID monitoring report will be changed to snmp trap reporting. For details, please check the following website. NEC Support Portal http://www.58support.nec.co.jp/global/download/N8103-239/WBEM_uninstall_en.pdf ● Cautions on using Linux OS Use the device name of LOM or optional NIC which the OS automatically recognizes.
  • Page 41 5) Notice of the function in general ● Caution for operating BMC Configuration Utility in the System Utilities If you execute POST or change the BMC configuration while rebooting the iLO, some server settings such as Serial Number and Product ID may be lost. In addition, there is a possibility that it does not operate normally in the restart process immediately after.
  • Page 42 (6) Check the values of Serial Number and Product ID by selecting the menu of the System Utilities: System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options > Advanced Service Options. (7) If the values of Serial Number and Product ID are satisfactory, go to step 14. (8) If the values are unexpected or lost, select the menu of the System Utilities: System Configuration >...
  • Page 43 “Unknown”, but it does not affect server operation and SAS Controller operation. ● About FCoE function in N8104-173/177 The FCoE function (Fibre Channel over Ethernet) isn't supported with this product as NEC. The FCoE function is enabled in N8104-173 in spite of the LOM firmware version, in N8104-177 with Family Firmware Version after 8.35.43.
  • Page 44 A) The additional options by firmware update ■ About changing the BIOS/Platform Configuration (RBSU) menu Some options are added or changed by firmware update of this product. The additional options are listed below. (1) Server Availability Menu When you select System Configuration > BIOS/Platform Configuration (RBSU) > System Options > Server from the System Utilities, the menu appears.
  • Page 45 (4) Intel UPI Options Menu When you select System Configuration > BIOS/Platform Configuration (RBSU) > Power and Performance Options > Intel UPI Options from the System Utilities, the Intel UPI Options menu appears. For details about the additional options, see the table below. Option Parameter Description...
  • Page 46 (7) PCIe Devices Configuration Menu When you select System Configuration > BIOS/Platform Configuration (RBSU) > PCI Device Configuration from the System Utilities, the PCI Device Configuration menu appears. For details about the additional options, see the table below. Option Parameter Description Advanced PCIe Configuration (a) Advanced PCIe Configuration Menu...
  • Page 47 (8) Fan and Thermal Options Menu When you select System Configuration > BIOS/Platform Configuration (RBSU) > Advanced Options > Fan and Thermal Options from the System Utilities, the Fan and Thermal Options menu appears. For details about the additional parameter, see the table below. Option Parameter Description...
  • Page 48: Errata Information

    B) Errata Information The following table covers corrections for User’s Guide. Please read the following information and use it as reference. ■ Errata Information for Express5800/R120h-1E User’s Guide Error Correct Storing the electronic edition in Starter Pack The electronic edition has been published on...
  • Page 49: Memory Options Menu

    ■ Errata Information for Express5800/ R120h-1E, R120h-2E Maintenance Guide Error Correct Storing the electronic edition in Starter Pack The electronic edition has been published on Manuals DVD or releasing in the Website a website (https://www.nec.com/express/). (http://jpn.nec.com/) Windows Server 2016 Essentials Incompatible Abbreviations of Operating Systems (Windows) P.65...
  • Page 50 ■ Errata Information for Express5800/R120h-1E, R120h-2E Installation Guide (Windows) Error Correct Electronic manuals are stored on Starter Pack The electronic edition has been published on Manuals DVD or on the website a website (http://www.nec.com/express/). (https://www.nec.com/express/). Windows Server 2016 Essentials Incompatible...
  • Page 51 ■ Correction of DIMM installation order There are misdescription about DIMM installation order in user's guides. The following is the correction. Correction point ・Express5800/120h-1E User’s Guide Chapter 2 Preparations 1.8 DIMM 1.8.2 DIMM installation order (Continue to the next page) ・Express5800/120h-2E User’s Guide Chapter 2 Preparations 1.9 DIMM 1.9.2 DIMM installation order DIMM installation order...
  • Page 52 ■ For Inqu iries Regarding this Matter If you have any questions on the contents of this document, please contact the dealer where you purchased the product or our sales representative. * GZS-000755-032-15 * June 2022 17th Edition...

This manual is also suitable for:

Express5800/r120h-2e