Table of Contents
Advertisement
About this task
The following images indicate the location of the power button and provide a visual representation of the installation procedure.
Steps
1. Insert the power-button cable into the slot from the front-side of the computer, and press the power-button head until it
clicks into the place in the chassis.
2. Align and connect the power-button cable to the connector on the system board.
Next steps
1. Install the
hard-drive and optical-drive
2. Install the
2.5/3.5-inch hard-drive
3. Install the
front
bezel.
4. Install the
side
cover.
5. Follow the procedure in
Power-supply unit
Removing the power-supply unit
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
2.5-inch hard-drive
4. Remove the
hard-drive and optical-drive
bracket.
caddy.
after working inside your
before working inside your
assembly.
bracket.
computer.
computer.
Removing and installing components
49
Advertisement
Table of Contents
