Control functions
ate the engine longer than necessary if
there is an error code to avoid possible en-
gine damage.
[ECS00820]
RS90P / RS90PLT / RST90PGT
2
1. Warning light "
2. Engine trouble warning indicator "
3. Error code display
RST90
3
1. Warning light "
2. Engine trouble warning indicator "
3. Error code display
ESU10531
Engine stop switch " "
The engine stop switch is used to stop the en-
gine in an emergency. Simply push the stop
switch to stop the engine. To start the engine,
pull the stop switch and proceed with starting
the engine. (See page 47 for engine starting
procedures.)
24
3
"
"
1
2
"
"
1
1. Engine stop switch "
During the first few rides, practice using the
stop switch so that you can react quickly in an
emergency.
ESU10661
Headlight beam switch
"LIGHTS"
Push the headlight beam switch to change the
headlight to high beam "HI" or to low beam
"LO".
1. Headlight beam switch "LIGHTS"
2. High beam "HI"
3. Low beam "LO"
ESU12654
Grip/thumb warmer adjusting
switch
The grip warmer adjusting switch and the
thumb warmer adjusting switch control the
electrically heated handlebar grips and throt-
tle lever respectively.
"