Check Items Before Installation; The Ip Addresses For Communication Between The Host Machine And Equipment Are Set Automatically; Securing Space For Installation; Installation Outline Drawing - Canon imagePASS-P1 Service Manual

Check Items before
Installation
The IP addresses for
communication between the host
machine and equipment are set
automatically
1. Turn ON the main power switch of the host machine.
2. Set the value in the following service mode (Level 1)
to "3".
• COPIER > OPTION >INT-FACE > IMG-CONT
3. Exit from Service Mode.
4. Turn OFF the main power switch of the host
machine.

Securing space for installation

Be sure to secure the space for installing this equipment as
shown in the figure. The space of 200 mm or more from the
back of this equipment is necessary.
200 mm or more
(8in)
Equipment
Rearside
Frontside
<Others>
55
7. INSTALLATION PROCEDURE

Installation Outline Drawing

Checking the Contents

x1
x2
Crossover Ethernet
Cable (0.5 m) x1
Straight Ethernet Cable (3.0 m)
(for network connection) x1
x2 Stepped
Screw; M4
x4
x2
• Including guides
x1
x1
x1
x1
Screw with
Toothed Washer; M4x8
x8