Advertisement
Oe
4
Connection:
Insert the headphone jack (3.5 mm @) into the socket ®.
Operation:
Press the AUX button, then adjust the volume with the
< ee > button.
The adjusted volume is displayed ona scale.
Connection:
Connect. your satellite receiver with an appropriate cable to
black EURO AV socket ©.
Operation:
Continue to press the OAV button until AV 1 appears.
Keep the SAT button depressed and enter the desired channel
position with the numeric buttons 1... 0.
Certain television stations that broadcast via cable scramble
their programmes. The sound and picture signals you receive
on
your television
are
purposefully
distorted.
You
can
unscramble these kinds of transmissions with a decoder.
Connect your decoder to the black EURO AV socket © and
switch it on.
Select the scrambled channel position on your television.
Press buttons AUX and OAV.
"DESCRAMBLER OFF'.appears.
By repeatedly pressing the OAV button, the following func-
tions. can be selected::
"DESGRAMBLER ON AUTOMATIC"
Switches-automatically to mono, stereo, or two-channel
broadcasts. This depends on the television broadcast received
via aerial.
42
"DESCRAMBLER ON STEREO"
The left and right sound channels of additional units attached
to the black EURO AV. socket are switched through to the
speakers.
"DESCRAMBLER ON MONO -L*
For "Mono L", the left sound channel is switched to both
speakers.
"DESCRAMBLER ON MONO. R*
For "Mono R", the right sound. channel is switched to the
speakers.
The scrambled programmes are.routed from the television to
the decoder, are descrambled, and are then routed. back to
the television where the unscrambled signals can be viewed
as a normal television programme.
You can. also record the programme with a video recorder
attached to the blue AV socket. If a programme location is to
be set up. for which decorder operation may be: unsuitable,
press the AUX
button
and then the OAV button.
until
""DESCRAMBLER OFF" appears.
Advertisement
