Advertisement
Connecting the DVG-7022S directly to
a Modem and Computer (continued)
e. Attach one end of the Ethernet Cable provided in this package to the
LAN or Ethernet Port on the Cable/DSL Modem.
f.
Attach the other end of the provided Ethernet
Cable to the WAN Port of the DVG-7022S.
g. Connect a standard analog telephone and the phone port on the rear
panel of the DVG-7022S by the provided phone cable.
h. Connect your original telephone line on the
wall jack and the line port on the rear panel of
the DVG-7022S by the provided phone cable.
i.
Reconnect the power to the Cable/DSL
Modem (Plug in or turn on the power switch).
j.
Connect the Power Adapter to the Power Connecter on the DVG-
7022S.
k. Connect the other end of the Power Adapter to
an available electrical outlet (Wall Socket or
Surge Protector).
l.
Restart your PC.
If your ISP registers your computer's MAC address, see the section labeled MAC
Cloning for Connections in the user manual on the CD-ROM.
PPPoE Users, please continue to the next page for additional configuration steps.
Hardware configuration is complete! If your VoIP service is already activated, you
can make phone calls now.
5
Advertisement
