Page 1
All manuals and user guides at all-guides.com 95600 G - 95601 G - 95602 G 95604 G Gas hob Table de cuisson Kochmulde Gaskookplaat Piano di cottura Operating and Installation Instructions GB Notice dutilisation et dencastrement Gebrauchs- und Einbauanweisung Gebruiksaanwijzing en...
All manuals and user guides at all-guides.com ENGLISH Important Safety Information You MUST read these warnings carefully before installing or using the hob. If you need assistance, contact our Customer Care Department on 08705 350 350 Installation Child Safety During Use...
Page 3
All manuals and user guides at all-guides.com Service Environmental Information Keep this instruction book for future reference and ensure it is passed on to any new owner.
All manuals and user guides at all-guides.com Contents Important Safety Information ................ 2 Instructions for the User ................5 Description of the Hob ..................5 Operation ......................6 Maintenance and Cleaning ................6 Something Not Working? ................7 Service and Spare Parts ................7 Guarantee Conditions ..................
All manuals and user guides at all-guides.com Description of the Hob (Model 95602 G) INSTALLATION Any gas installation must be carried out by a registered CORGI installer, and in accordance with existing rules and regulations. WHEN THE HOB IS FIRST INSTALLED...
Take care when frying food in hot oil or fat, as the overheated splashes could easily ignite If the control knobs become difficult to turn, please contact your local AEG Service Force Centre. Maintenance and Cleaning Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob from the electricity supply.
3. Should guarantee repairs be necessary the purchaser must inform the nearest AEG Service Force Centre (manufacturers service or authorised agent). AEG reserves the right to stipulate the place of the repair (i.e. the customers home, place of installation or AEG workshop).
All manuals and user guides at all-guides.com Instructions for the Installer Engineers technical data OVERALL DIMENSIONS CUT OUT DIMENSIONS SUPPLY CONNECTIONS Gas: Electric: IGNITION HT SPARK Spark Generator Spark Gap HEAT INPUT APPLIANCE CLASS Rear Left Burner (semi rapid) APPLIANCE Front Left Burner CATEGORY (rapid)
All manuals and user guides at all-guides.com BURNER RAPID SEMI-RAPID AUXILIARY (large) (medium) (small) TYPE OF GAS POSITION M I N M I N M I N NOMINAL THERMAL POWER 0.65 0.45 0.33 NATURAL GAS 20 mbar NOMINAL FLOW VALUE = RATE 0.276 0.062...
All manuals and user guides at all-guides.com Location CLEARANCES REQUIRED CLEARANCES REQUIRED WHEN FITTING THE GAS HOB WHEN FITTING THE GAS HOB WITHOUT A COOKER HOOD ABOVE WITH A COOKER HOOD ABOVE 700 mm 650 mm 400 mm 700 mm 400 mm 400 mm 400 mm...
Page 13
All manuals and user guides at all-guides.com Installation FO 0814 FO 0264 Gas Connection It is important to install the elbow correctly, with the shoulder on the end of the thread, fitted to the hob connecting pipe. Failure to ensure the correct assembly will cause leakage of gas.
Page 14
All manuals and user guides at all-guides.com Cut Out Size Building In Building over a cupboard or drawer FO 2359 ON/OFF SWITCH ON/OFF SWITCH FLEX OUTLET FLEX OUTLET FO 0764 FO 0763...
All manuals and user guides at all-guides.com Building in Building over a kitchen unit with door FO 1013 Fitting the hob to the worktop FO 2108 FO 2107...
All manuals and user guides at all-guides.com Electrical connections FO 0390 A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely.
Page 17
All manuals and user guides at all-guides.com Permanent Connection Wiring diagram...
All manuals and user guides at all-guides.com Fault Finding Blue Brown Green Yellow Preliminary Electrical Systems Check START Blue Isolate appliance Green and carry out: Brown Yellow A: Earth Continuity check. Carry out: Carry out: D: Resistance to C: Polarity check. Earth check.
Page 19
All manuals and user guides at all-guides.com A. EARTH CONTINUITY CHECK B. INSULATION CHECK...
Page 20
All manuals and user guides at all-guides.com Fault finding Ignition System / Gas Ignition Check gas supply at Ignitor does not spark burner Check plug top fuse and Light burner manually replace if necessary Check by pass simmer Check polarity and earth adjusted continuity of supply point Check fitting...
All manuals and user guides at all-guides.com Conversion from Natural Gas to LPG Method TO ADJUST THE GAS RATE IMPORTANT The replacement/conversion of the gas hob should only be undertaken by a competent person...