Table of Contents
Advertisement
Maintenance and Storage
•
Store the machine indoors in a dry, secure place
that is out of the reach of unauthorized users.
•
Unplug the power cord from the outlet before
starting any maintenance or cleaning to reduce
risk of electric shock.
•
Maintain or replace safety and instruction labels
as needed.
•
Do not charge with a damaged cord or plug.
Replace a damaged cord or plug immediately.
•
If the charger or power cord is damaged, do not
use it; take it to an authorized Toro distributor.
Hauling the Machine
•
Use care when loading or unloading the machine
into a trailer or a truck.
•
Use full-width ramps for loading the machine into
a trailer or a truck.
•
Tie the machine down securely.
Refer to
Figure 24
and
locations on the machine.
Note:
Load the machine on the trailer with the front
of the machine facing forward. If that is not possible,
secure the machine hood to the frame with a strap,
or remove the hood and transport and secure it
separately or the hood may blow off during transport.
CAUTION
Loose seats may fall off the machine and
trailer when transporting the machine, and
the seats may land on another machine or
obstruct the roadway.
Remove the seats or ensure that the seats are
secured by the pivot pins.
1. Towing tongue and tie-down point (front of the machine)
Figure 25
for the tie-down
Figure 24
1. Rear tie-down points
g319238
24
Figure 25
g319239
Advertisement
Table of Contents
