LG 15Z95P Series - Notebook Laptop Manual

Introduction

Any malfunction in the built-in solid state drive (SSD) may result in loss of stored data. You must back up all critical user data to an external storage device (USB HDD, memory card, etc.).

If you shut the system down before it is completely loaded, the product may not shut down properly. Shut down the system after it is completely loaded. (It takes about one or two minutes to completely load the system and may vary depending on the conditions.)

Product Components

The components shown below are provided when you purchase the product. Check the components before use.

• When cleaning the product, use a cleaning agent dedicated to the PC. If you use thinner, benzene, alcohol or other similar agent, the product may be damaged or deformed.
  

Names of Parts

Front

1. Webcam Operation Status Lamp
2. Webcam
3. Built-in Microphone
4. Keyboard
5. Touchpad
6. Power Button [ ] (Fingerprint Sensor¹)

1 Only applies to products with the fingerprint recognition function.

Note
You can use hot keys to use Windows more conveniently.

Side

1. HDMI Port
2. USB-C Port¹ (USB 4.0 Gen 3x2 / Thunderbolt / Can connect to a LAN adapter / Power Port)
3. Headphone Port (4-pole Ear Microphone Port³)
4. Built-in Speakers
5. UFS/Micro SD Card Slot
6. USB Port (USB 3.2 Gen 2x1²)
7. Security Keyhole (Kensington Security Slot)

1 Depending on the specifications of the device connected to the USB-C port, it acts as a USB or Thunderbolt port.
The USB-C port provides Quick Charging and Always-On Charging functions for devices that support USB PD (Power Delivery).

2 The names of USB versions have changed from USB 3.0 (or USB 3.1 Gen 1) and USB 3.1 (or USB 3.1 Gen 2) to USB 3.2 Gen 1x1 and USB 3.2 Gen 2x1. Devices that are not authorized with USB may not operate normally when connected to the USB port. The transmission speed of a USB port may differ depending on the type of storage device (NVMe, SSD, HDD, etc.) in the system and the connected USB device.

3 The 4-pole ear microphone port supports US 4-pole standards, but not the European 4-pole ear microphone.
When using ear microphone (or Bluetooth headset), audio input and output are directed to the connected device and the microphone and speaker on PC do not work.
The 4-pole ear microphone port does not support external microphone.

LAN Adapter

To connect to the wired LAN, you must purchase a LAN adapter separately.

1. Connect the LAN adapter to the USB-C port on the PC.
   
   • The USB-C port can be used without having to differentiate between the top and bottom surfaces.
2. Connect the network cable (LAN) to the LAN adapter.
3. Check if you can connect to the internet properly.

Connecting to the Power

The AC adapter is used to power and charge the PC.

• Do not use any other AC adapter than the one that was provided when you purchased this product.

1. Connect an end of the cable to the AC adapter and the other end to a power outlet.
   • The AC adapter can be used from 100 V to 240 V.
2. Connect the AC adapter jack to the PC USB-C port.
   
   • Ensure that the power jack linked to the AC adapter and product is connected firmly.

When the AC adapter is connected, the AC adapter lamp turns on.

• If you try to turn on the system that has entered the Hibernates mode or been turned off after a low-batteryt alarm, the system will not be turned on but the lamp will blink three times. If this is the case, connect the AC adapter and charge the battery sufficiently before using it.

Precautions When Using the AC Adapter
Do not bend the cable for the AC adapter too much.

• 
  Otherwise, the wires inside the cable may break and cause an electric shock or fire.

System Shutdown / Power Off

Press the [ ] key or [Cntrl] + [Esc] to display the Start menu.

• Press the Start button [ ] > Power button [ ] and select [Shut down].

Information on the Support and Update of Windows

• Depending on the product, some of the Windows functions may not be supported, and you may need to purchase a separate hardware, driver, or software to use the functions. Also, you may need to update the BIOS additionally. The Auto Update function of Windows is always activated. Updating Windows may incur Internet usage fees as well as additional system requirements for the storage device or the hardware. For more information, refer to the website https://www.microsoft.com.

Installation of UWP App

• The UWP app provided by LG Electronics can be installed only throught the Microsoft Store. Access Microsoft Store and search for the app to install it.

Reinstalling drivers

• Press the Start button [ ] and then select Settings [ ] > [Apps] > [Apps & features]. Then remove the driver to be reinstalled.
• Press the Start button [ ], run [All apps] > [LG Software] > [LG Update Center] and reinstall the drivers through the [Required Update] or [All List] menu.

Troubleshooting

The screen color does not properly display

• Check if the Reader Mode is turned on. If the Reader Mode is on, press the [ ] icon on the bottom right of the taskbar to turn it off.
• Using the Reader Mode and the Night light at the same time can cause color distortion. Set the Reader mode to [Off] or set the Night light settings to [Off].
  • Turning off Night light: Press the Start button [ ] and select Settings [ ] > [System] > [Display] > [Night light] > [Off].
• If the screen still does not properly display, contact the LG Electronics service center.
  • Reader mode controls the brightness and color of the LCD screen to look like printed paper and protect the user from eyestrain.

You cannot turn on the power

• Check if the power cord is connected.
• After disconnecting the power cord and reconnecting it, press the power button of the product.
• If the power is not on after reconnecting the power the power cord, remove the adapter and hold the power button for at least 6 seconds to reset the system. Once the system is reset, press the power button again to turn on the computer.

The system stops during use or does not properly turn off

• Remove the adapter and press the power button for approximately 6 seconds to reset the system. Once the system is reset, press the power button again to turn on the computer.
  • 
    Unsaved data may be lost. Pressing the power button while the PC is in use may cause damage to the hard disk or a system error.

The touchpad is not functioning properly

• Press the Start button [ ], run [All apps] > [LG Software] > [LG Control Center] and set [System Settings] > [Touchpad] to [Enable].
• If the touchpad does not function properly, the touchpad is either in the Touchpad Off (disabled) state or Touchpad Auto (disabled when the mouse is connected) state.

The wireless LAN is not connected

• Press [Fn] + [F6] to check if the wireless network device is turned off.
  • Press [Fn] + [F6] to set airplane mode to [OFF].
    Click the Wi-Fi [ ] icon on the right side of the taskbar and check if AP displays properly.
• Every time you press [Fn] + [F6], the wireless network and airplane mode turns on or off.
• You may not be able to connect to a secure wireless network. Ask the wireless network administrator.
• Reinstall the wireless LAN driver.

When an error message appears

• Check if the system is infected with a virus or a malicious code.

Precautions Regarding Battery

This product has a built-in battery pack. After purchasing your PC, be sure to charge the battery pack completely before using it for the first time.

• The battery is a wearable good and thus the battery may not last as long as before after the battery has been used for a long time.
• The internal battery cannot arbitrarily be removed or replaced. Removing it may void the warranty.
• If you need to remove or replace the battery, please visit a designated service center.
• We charge a fee for removing or replacing the battery.

Precautions When Using the Battery
	Use batteries certified and acknowledged by LG Electronics, Inc. Otherwise, an explosion or fire may occur.		Keep the battery away from heat. Otherwise, an explosion or fire may occur.
	Do not use the product on top of carpet, blanket or bed. Also, do not put the adapter under the blanket. The product may malfunction, cause a fire or burn the user due to temperature rise.		Prevent the battery from coming in contact with any metallic object like a car ignition key or a paper clip. Otherwise, this may cause damage to the battery, a fire or burn due to overheat in the battery.
	Avoid humidity and heat above 140°F as in cars or saunas. Otherwise, an explosion or fire may occur.		If you find leakage or smell bad odor from the battery, contact the local service center. Otherwise, an explosion or fire may occur.
	Do not leave the powered on product in a space without enough ventilation (i.e. bags) repeatedly or for an extended time. The battery may overheat and cause a fire.		Charge the battery only with the provided charger. Otherwise, the battery may be damaged presenting a risk of fire.
Guide on Battery Usage
	When the PC is not used for an extended period of time, keep the battery level at about 50% to increase the battery lifespan.		Use the Extend Battery Life function in the LG Control Center. You can limit the battery charge to 80% of the maximum charging capacity to increase the battery lifespan.
	To increase battery lifespan, use the battery for a while before charging it rather than keeping the battery completely charged.		If you don't use the product for a long time with the battery completely charged, the battery lifespan may decrease

www.lg.com

Documents / Resources

References

• LG Electronics & Home Appliances | Shop Now | LG USA
• Microsoft – Cloud, Computers, Apps & Gaming

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download LG 15Z95P Series - Notebook Laptop Manual