Technical Data; Noise/Vibration Information; Dust/Chip Extraction - Bosch Professional GSR 1440-LI Original Instructions Manual

OBJ_BUCH-2571-002.book Page 7 Monday, June 20, 2016 10:23 AM

Technical Data

Cordless Drill/Driver
Article number
Rated voltage
No-load speed
– 1st gear
– 2nd gear
Max. torque for hard/soft screwdriving application
according to ISO 5393
Max. drilling dia.
– Wood
– Steel
Max. screw dia.
Chuck clamping range
Weight according to EPTA-Procedure 01:2014
Permitted ambient temperature
– during charging
– during operation **
and during storage
Recommended batteries
Recommended chargers
Recommended chargers for wireless charging
batteries
*depending on the battery pack being used
** Limited performance at temperatures <0 °C

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-1.
Typically the A-weighted sound pressure level of the product
is less than 70 dB(A). Uncertainty K = 3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-1:
Screwdriving without impact: a <2.5 m/s
h
2
Drilling into metal: a < 2.5 m/s , K=1.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Bosch Power Tools
V=
-1
min
-1
min
Nm
mm
mm
mm
mm
kg
°C
°C
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Assembly
 Before any work on the machine (e. g., maintenance,
tool change, etc.) as well as during transport and stor-
age, set the rotational direction switch to the centre
2 2
, K=1.5 m/s
position. Unintentional actuation of the On/Off switch can
2
lead to injuries.
Changing the Tool (see figure A)
 Before any work on the machine itself (e. g. mainte-
nance, tool change, etc.) as well as during transport
and storage, remove the battery from the power tool.
There is danger of injury when unintentionally actuating
the On/Off switch.
Open the keyless chuck 2 by turning in rotation direction ,
until the tool can be inserted. Insert the tool.
Firmly tighten the collar of the keyless chuck 2 by hand in ro-
tation direction . This automatically locks the drill chuck.

Dust/Chip Extraction

 Dust from materials such as lead-containing coatings,
some wood types, minerals and metal can be harmful to
one's health and cause allergic reactions, lead to res-
GSR 1440-LI GSR 1800-LI
3 601 JA8 4.. 3 601 JA8 3..
14.4
0 – 420
0 – 1400
30/15
25
10
7
0.8 –10
1.3/1.6*
0... +45
-20... +50
GBA 14,4V..
GBA 18V...W
AL 18..
GAL 3680
1 609 92A 349 | (20.6.16)
English | 7
18
0 – 400
0 – 1300
34/18
29
10
8
0.8 –10
1.4/1.7*
0... +45
-20... +50
GBA 18..V
AL 18..
GAL 3680
GAL 18...W