Troubleshooting - Husqvarna 40-B140X Operator's Manual

1. Put the battery in the battery charger. When the charging LED on the
battery charger comes on, the battery is connected correctly to the
battery charger.
2. The battery is fully charged when all LEDs on the LED indicator on the
battery are on.
3. Remove the battery from the battery charger.
Battery charging status
A Husqvarna Li-ion battery can be charged or used at all charging levels.
The battery is not damaged. A fully charged battery will not decrease its
charge when the battery is left in the charger.

TROUBLESHOOTING

Symptoms
The battery error LED flashes.
The battery temperature LED is ON.
6
LED indicator
4 LED lights are on
3 LED lights are on
2 LED lights are on
1 LED light is on
1 LED light flashes
Cause
The battery is empty.
The battery does not operate. The operating
range of the battery is at its limit.
The battery is too cold or too hot to use.
Battery status (state of charge)
The battery is 76% - 100% charged.
The battery is 51% - 75% charged.
The battery is 26% - 50% charged.
The battery is 10% - 25% charged.
The battery is 0% - 10% charged.
Action
Charge the battery.
Restart the battery product.
Keep the battery in an ambient temperature be-
tween -10°C (14°F) and 40°C (104°F). When the
battery has the correct temperature, it can be
used again.
2046 - 001 - 30.06.2023