Before First Use; Daily Use - AEG ProSense 6000 Series User Manual

10.2 Acoustic signals
The acoustic signals operate when the
programme is completed (sequence of
sounds for about 2 minutes).
To deactivate/activate the acoustic signals,
touch the Tijd besparen and the Startuitstel
buttons simultaneously for about 6 seconds.
If you deactivate the acoustic signals,
they continue operate when the
appliance has a malfunction.

11. BEFORE FIRST USE

1. Make sure that all transit bolts have been
removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3. Pour a small quantity of detergent into the
compartment marked

12. DAILY USE

WARNING!
Refer to Safety chapters.
12.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the button for a few seconds to
activate the appliance.
A short tune sounds (if activated).
12.2 Loading the laundry
1. Open the appliance door.
2. Shake the items before you put them in
the appliance.
3. Put the laundry in the drum, one item at a
time.
Make sure not to put too much laundry in the
drum.
4. Close the door firmly.
10.3 Permanent Extra Rinse
With this option you can permanently have an
extra rinse when you set a new programme.
• To activate/deactivate this option touch
4. Set and start a programme for cotton at
This removes all possible dirt from the drum
and the tub.
.
Make sure that no laundry stays between
the seal and the door. There is a risk of
water leakage or damage to the laundry.
Washing heavily oiled, greasy stains
could cause damage rubber parts of the
appliance.
the Temperatuur button and the
Centrifugeren button simultaneously until
relevant indicator
on display.
the highest temperature without any
laundry in the drum.
CAUTION!
CAUTION!
comes on/goes off
ENGLISH 19