Siemens SIMATIC S7-1500 Manual page 25

Output current
For signal "1" rated value
For signal "1" permitted range, min.
For signal "1" permitted range, max.
For signal "0" residual current, max.
Parallel switching of 2 outputs
For logic operations
For increased performance
For redundant control of a load
Switching frequency
With resistive load, max.
With inductive load, max.
With lamp load, max.
Total current of outputs
Current per channel, max.
Current per group, max.
Current per module, max.
Relay outputs
Number of relay outputs
Rated input voltage of relay coil L+ (DC)
Current consumption of relays (coil current of all
relays), max.
External fuse for relay outputs
Contact connection (internal)
Size of motor starter according to NEMA, max.
Number of switching cycles, max.
Relay approved acc. to UL 508
Switching capacity of the contacts
•
•
Cable length
Shielded, max.
Unshielded, max.
Isochronous mode
Isochronous mode (application synchronized up to
terminal)
Interrupts/diagnostics/status information
Substitute values can be applied
Interrupts
Diagnostics interrupt
Digital output module DQ 16x230VAC/2A ST Relay (6ES7522-5HH00-0AB0)
Manual, 03/2015, A5E34934019-AA
With inductive load, max.
With resistive load, max.
Technical specifications
6ES7522-5HH00-0AB0
2 A
10 mA; 10 V
2 A; thermal continuous current
0 A
Yes
No
Yes
1 Hz
0.5 Hz
1 Hz
2 A; see additional description in the manual
2 A; see additional description in the manual
32 A; see additional description in the manual
16
24 V
150 mA
Circuit breaker B10 / B16
No
5
See additional description in the manual
No
2 A; see additional description in the manual
2 A; see additional description in the manual
1000 m
600 m
No
Yes
Yes
25