8. MESSAGES
message
Cannot find COM port
missing COm port has
changed to port X
Cannot find setting file
Checksum disagreement
Communication driver is
busy. please wait a few
minutes
an unexpected error has
occurred
Communication time Out
Communication error (CS
illegal)
Communication error (error
response)
Copyright© 2013-2016 Fujitsu General Limited. All rights reserved.
meaning
COm port is not found.
Saved COm port is not
found.So configuration is
changed to port X.
→ this can be caused by
changing the port con-
nected to the communi-
cation box. (Because of
COm number change)
Application's config file is
missing.
Application's config file is
broken.
Communication driver is
communicating. wait a for
a few minutes and retry.
Undefined application error
occurs.
Communication is not es-
tablished for a period
Communication error
(checksum abnormal)
Communication error (there
is error response).
Solution
▪ Confirm if communica-
tion box driver is correctly
installed.
▪ Confirm if communication
box is connected.
▪ Confirm if the COM port
assigned to communica-
tion box is selected in
Setup.
▪ if communication box is
assigned to port X (usable
smallest number), you can
continue.
▪ if it is not assigned to port
X, you need to change
configuration.
▪ re-install the application.
▪ if the same message
remains for a long time,
reboot application.
reboot application.
Communication with target
is not stable. this can be
due to noise, try the follow-
ing countermeasures.
▪ Shorten communication
cable.
▪ Separate communication
cable from power line
(compressor lead, power
line).
▪ Check other noises (Car,
big motor etc.).
En-20