DeWalt DCCS674 Instruction Manual page 21

LED Indicator Guide
The section provides a list of possible LED blink patterns, the causes
and corrective solutions. The user or maintenance personnel can
perform some corrective actions, while others may require the
assistance of a qualified D WALT technician or your dealer.
e
Overload LED
ORANGE LED
Problem Solution
Unit stopped working. Unit is being forced. Restart and apply
less pressure.
If problem continues, contact D
service representative at 1-800-4-D
(1-800-433-9258).
RED LED
Problem Solution
Unit module is too hot.. Unit is being forced. Let the unit rest and cool
down. Restart and apply less pressure.
If problem continues, contact D
service representative at 1-800-4-D
(1-800-433-9258).
Chain Brake LED
RED LED
Problem Solution
Unit will not start. Disengage the chain brake/front hand guard.
Pull the chain brake/front hand guard towards
the front handle into the "set" position as
shown in Fig. O. Restart the unit.
If problem continues, contact D
service representative at 1-800-4-D
(1-800-433-9258).
State of Charge Indicator LEDs
Problem
Battery pack
is depleted.
WALT customer
e
WALT
e
Problem
Battery is too hot..
WALT customer
e
WALT
e
WALT customer
e
WALT
e
BLINKING WHITE LEDs
Solution
Remove and replace the battery pack.
If problem continues, contact D
e
service representative at 1-800-4-D
(1-800-433-9258).
BLINKING RED LEDs
Solution
Unit is being forced. Let the unit rest and cool
down. Restart and apply less pressure.
Remove and replace the battery pack. Restart
and apply less pressure.
If problem continues, contact D
e
service representative at 1-800-4-D
(1-800-433-9258).
English
WALT customer
WALT
e
WALT customer
WALT
e
19