English 18V RATCHET DCF512, DCF513 Congratulations! EC‑Declaration of Conformity You have chosen a D WALT tool. Years of experience, thorough Machinery Directive product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data Ratchets DCF512 DCF513...
English 3) Personal Safety power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by a ) Stay alert, watch what you are doing and use poorly maintained power tools. common sense when operating a power tool. Do not f ) Keep cutting tools sharp and clean.
English Safety Instructions for Ratchet Tools Using an Extension Cable An extension cord should not be used unless absolutely • Hold power tool by insulated gripping surfaces, when necessary. Use an approved extension cable suitable for performing an operation where the fastener may the power input of your charger (see Technical Data).
English nOTE: This could also mean a problem with a charger. charger is ventilated through slots in the top and the bottom of the housing. If the charger indicates a problem, take the charger and battery • Do not operate charger with damaged cord or plug— pack to be tested at an authorised service centre.
Page 10
English Transportation The battery pack is not fully charged out of the carton. Before using the battery pack and charger, read the safety instructions WARNING: Fire hazard. Transporting batteries can below. Then follow charging procedures outlined. possibly cause fire if the battery terminals inadvertently come in contact with conductive materials.
English certain shipping regulations that are imposed upon the higher Do not incinerate the battery pack. Watt hour batteries. For example, the Transport Example of Use and Transport Label Marking USE (without transport cap). Example: Wh rating Wh rating might indicate indicates 108 Wh (1 battery with 108 Wh).
English To Remove the Battery Pack from the Tool Example: 2021 XX XX 1. Press the battery release button 4 and firmly pull the battery pack out of the tool handle. Year and Week of Manufacture 2. Insert battery pack into the charger as described in the Description (Fig.
English Variable Speed Trigger (Fig. A) 6. If the ratchet stalls, the tool is overloaded or is being improperly used. Release the variable speed trigger The tool is turned on and off by pulling and releasing the switch 1 immediately. Do not press the variable speed variable speed trigger ...
English Protecting the Environment Separate collection. Products and batteries marked with this symbol must not be disposed of with normal household waste. Products and batteries contain materials that can be recovered or recycled reducing the demand for raw materials. Please recycle electrical products and batteries according to local provisions.
Page 16
Belgique et WALT ‑ Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be luxembourg België en luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)