Husqvarna Blastrac EBE 500 Operator's Manual page 21

5. Put an applicable tool in the blast wheel blades to
prevent rotation. Remove the bolt and discard it.
6. Remove the impeller.
To install the impeller
1. Clean the threads of screw hole for the bolt for the
impeller with pressurized air.
2. Install the impeller.
2107 - 001 - 27.07.2023
3. Block the blast wheel blades with an applicable tool
and install the bolt for the impeller.
CAUTION:
CAUTION:
install the bolt. It can cause damage to
the threads.
4. Install the 2 screws, the 4 washers, the 2 cage
clamps and the control cage.
Always use a new bolt.
Do not use force to
21