Pioneer CT-W300 Operating Instructions Manual

Stereo double cassette deck

Advertisement

Operating
Instructions
MASEL
STEREO DOUBLE CASSETTE DECK
T=-W/30
Thank you for buying 'this F: seer product.
Please read through these ope.ating instructions so you will
"Know how to operate -your model properly. After you have
finished reading the instructions, put them away in a safe
place for future reference.
In some countries or regions, the shape of the power plug
and power outlet may sometimes differ from that shown
in the explanatory
drawings.
However,
the method
of
connecting and operating the unit is the same.
WARNING:
ro prevent FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
IMPORTANT NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed
warranty card and keep in a secure area. This is for your
security.
LINE. VOLTAC
Only multi-voltag. _
fy
U.S., Canadian, European, U.K.
not provided with this switch.
Main voitages in Saudi Arabia are 127V and 220V only.
Never use this model with 110V setting in Saudi Arabia.
inodels are
The fine voltage selector switch is on the rear panel. Before
your model is shipped from the factory, this switch is set
to the power requirements of the destination. Check that
it is set properly before plugging the power cord into the
AC outlet. If the voltage is not properly set or if you move
to an area where the voltage requirements differ,adjust the
selector switch as follows.
1.
Disconnect the power cord.
2.
Use a medium-size screwdriver.
3.
Insert the screwdriver into the groove on the voltage
selector, and adjust so that the tip of the arrow points
to the voltage value of your area.
Medium-size screwdriver
"This product is manutactured to comply with the radio
interference requirements of EEC Directive 76/88 9/EEC
and 82/499/EEC."
@ PIONEER'
The future of sound and vision.
-

Advertisement

Table of Contents
loading

Table of Contents