Operation - Black & Decker BCED26 Instruction Manual

SET UP & USE

OPERATION

CONTROL PANEL
MODE SELECTOR
. . . . . . when button is raised ECO MODE is activated
. . . . . . when button is pressed NORMAL MODE is activated
NORMAL : By default, the dryer operates under the 'NORMAL' mode (the
mode button is pressed), in combination with the presets, 'SENSOR DRY' and
'TlMER', for optimal drying performance. The 'SENSOR DRY' function can be
adjusted to your drying needs by using the dial and temperature guidelines.
ECO : The Dryer operates using an energy-saving mode, independent of the
'SENSOR DRY' and the 'TIMER' functions. The dryer will automatically run in
'ECO' mode for a total duration of 270 minutes. The dryer will begin air drying
the laundry for 150 minutes with cool air, followed by another 120 minutes using
hot air by activating the heating element. Simply open and load the dryer, close
the door, make sure the mode button is raised, and the dryer will run in the
'ECO' mode. If the power turns off while the dryer is in 'ECO' mode, the unit will
remember the time remaining and resume drying when the power goes on again.
Memory won't be affected if the door is opened when the unit is off. However,
if the door is opened while the dryer is on, the remainder time will not be
remembered and 'ECO' drying will not resume.
SENSOR DRY SELECTOR
ON : When the drying time reaches 120 minutes, the sensor dry function
measures the moisture and humidity levels during the cycle and automatically
adjusts the heating time for a more efficient drying performance. As a result, the
dryer may stop generating heat in advance of the 'TIMER' preset, but the preset
cycle continues by generating cool air until the drying time is complete and the
dial is in the 'Off/0' position.
OFF : The dryer operates according to the time set by the 'TIMER' until the preset
finished in the 'Off/0' position.
Page 13