Husqvarna QW14065T User Manual page 22

22 www.husqvarna-electrolux.se
When you use the liquid
detergent:
• Do not use gelatinous or
• Do not put more liquid
• Do not set the delay start
11.5 Setting a programme
1. Turn the programme knob and set
the programme:
• The related programme indicator
comes on.
• The indicator of Start/Pause
flashes.
• The display shows: the default
temperature, the spin speed, the
indicators of the programme
phases and the programme
duration.
2. If necessary, change the
temperature, the spin speed, the
cycle duration, or add available
options. When you activate an
option, the indicator of the set option
comes on.
In case a selection is not
possible , no indicator
comes on and an acoustic
signal sounds.
11.6 Starting a programme
without the delay start
Press button Start/Pause
programme.
The relevant indicator stops to flash and
stays on.
On the display the indicator of the phase
is operation starts to flash.
The programme starts, the lid is locked.
The display show the indicator
The drain pump can operate
for a short time when the
appliance fills water.
thick liquid detergents.
then the maximum level.
function.
to start the
11.7 Cycle time recalculation
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
• The display shows the
11.8 Starting a programme
with the delay start
1. Press button Delay Start
and again until the display shows the
number of minutes or hours of delay.
The related indicator comes on.
2. Press button Start/Pause
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.
Before you press button
Start/Pause
appliance, you can cancel or
change the set of the delay
start.
11.9 Cancelling the delay
start
To cancel the delay start:
1. Press button Start/Pause
the appliance to pause.
The related indicator flashes.
2. Press button Delay Start
repeatedly until the display shows .
.
3. Press button Start/Pause
to start the programme immediately.
11.10 Interrupting a
programme and changing a
option
You can change only some options
before they operate.
automatically the cycle
time to the laundry you
have put in the drum to
have perfect washing
results in the minimum
necessary time.
new time value.
to start the
again
.
to set
again