Ac1900 high performance mesh wi-fi range extender (88 pages)
Summary of Contents for D-Link DAP-1860
Page 1
Technical Support Setup Procedure How to configure DAP-1860 as Access Point with non-default wireless SSID. (Note: Please ensure the device LED is blinking orange colour before you do setup. If it is not blinking in orange colour, follow the guide on page 4 on how to reset the device before follow the guide to setup.)
Page 2
Technical Support Setup Procedure Step 5: Open Internet Explorer and enter http://192.168.0.50 on the URL bar. Step 6: Click on X. Step 7: Click on OK. Step 8: Click on Settings and select Extender. Step 9: Select Ethernet for Existing Network. Step 10: 2.4Ghz Extended Wi-Fi a) Give a different Wi-Fi Name in the box beside Wi-fi Name (SSID).
Page 3
Technical Support Setup Procedure Step 11: 5Ghz Extended Wi-Fi a) Give a different Wi-Fi Name in the box beside Wi-fi Name (SSID). b) Give a different Wi-Fi Password in the box beside Password Step 12: Click on Save. Step 13 a) Plug DAP-1620 direct to power outlet. b) Connect LAN Cable from DAP-1620 to LAN port of the Router.
Page 4
How to Reset DAP-1860 Step 1: Plug DAP-1860 direct to power outlet. Step 2: Power on DAP-1860 and wait for 1 min. Step 3: Use a paper clip to press and hold the Reset Button for 30 second. Step 4: Wait for 2 min for the device to fully power on after reset.