Adjusting settings
Calling up programming mode
The cooktop is switched off.
Touch and hold the and
sensors together until the +
sensor lights up and appears in
the timer display.
After a few seconds : (Programme
01) will flash alternately with : (Code)
in the timer display.
54
Setting a programme
Whilst the programme is visible in the
display (e.g. :), touch the + sensor
repeatedly until the number of the
programme you want appears in the
display.
Setting the code
Whilst the code is visible in the
display (e.g. :), touch the + sensor
repeatedly until the number of the
code you want appears in the display.
How to save settings
Whilst the programme is displayed
(e.g. :), touch the sensor until
the displays go out.
How to avoid saving the
settings
Touch the sensor until the
indicators go out.