Advertisement
Quick Links
Operating Instructions
Vacuum Cleaner
MC-YL697K/695K/693K/691K/690K
Model No.
MC-YL697/695/693/691/690
Thank you for purchasing the Panasonic product. Before use, please read this instruction manual
completely in order to use this product properly and ensure its lasting operation. After reading this manual
store it safely.
Advertisement
Related Manuals for Panasonic MC-YL697
Summary of Contents for Panasonic MC-YL697
- Page 1 Vacuum Cleaner MC-YL697K/695K/693K/691K/690K Model No. MC-YL697/695/693/691/690 Thank you for purchasing the Panasonic product. Before use, please read this instruction manual completely in order to use this product properly and ensure its lasting operation. After reading this manual store it safely.
-
Page 2: Table Of Contents
TABLE OF CONTENTS / Page / Page / • IMPORTANT SAFETY INSTRUCTIONS ......2-3 • DISCARDING THE DUST ......9-10 FOR THE USER ......9-10 ......2-3 ......9-10 ......2-3 • MAINTAINING YOUR VACUUM CLEANER ......11-12 • PART NAMES AND THEIR ASSEMBLY ...... - Page 3 • • • • • • • • • • • •...
-
Page 4: Part Names And Their Assembly
PART NAMES AND THEIR ASSEMBLY Curved wand Projection Suction regulator Hose supporter Hole Extension wands Hose Projection Hole Extension wand holder Floor nozzle Hose supporter Hose connection wand NOTE • At the beginning when you purchase this product, accessories like curved wand, hose, crevice tool and upholstery nozzle are located inside the dust box. - Page 5 Carrying handle Motor Housing ON/OFF switch Vac gauge Blower Cord storage hook Secondary filter Expander Filter supporter Filter Clamp Dust box Upholstery nozzle Dolly Crevice tool Grounding chain Protects the dust box from static electricity. Hose inlet • Align the triangle markings and push in the dust box until it clicks into place with the dolly. (Once it is fixed into place, it cannot be removed.) Hooks •...
-
Page 6: Operating Your Vacuum Cleaner
OPERATING YOUR VACUUM CLEANER Turn on the ON/OFF switch. Carrying handle How to use the blower Use the nozzle that is appropriate for the location you are cleaning. For locations where the nozzle will not enter, connect the hose to the Flooring: Press lever A Carpet: Press lever B blower and blow the dust out. -
Page 7: Storing Your Vacuum Cleaner
STORING YOUR VACUUM CLEANER Standby storage hole Cord storage hook To store the power cord, use the cord storage hook. Upholstery nozzle Crevice tool • For cushions and draperies. • For narrow places... -
Page 8: Discarding The Dust
DISCARDING THE DUST Removing the filter • If the vac gauge turns red, discard the dust. Pull the clamps upward. Remove the motor housing hanging upward with the carrying handle. Pull the expander upward and shake it about ten times. (Never shake up and down and leave the hose connected.) Remove the filter and empty dirt and dust. - Page 9 Installing the filter ON/OFF switch Motor housing Install the filter. Fix the motor housing and lock the clamps. Please ensure the location of the ON/OFF switch should be aligning with the hose inlet. Expander Filter Clamp Hose inlet Hose...
-
Page 10: Maintaining Your Vacuum Cleaner
MAINTAINING YOUR VACUUM CLEANER CAUTION / • The plug must be removed from the socket outlet before cleaning or maintaining the appliance. • IMPORTANT : Before re-installing the washable filter, make sure they are completely dry to avoid damaging the cleaner. NOTE Floor Nozzle •... - Page 11 Maintaining the filter Remove the expander from the filter as illustrated. Wash the filter in water by hand. (Do not use washer or dryer.) When filter becomes completely dry, replace it as in the same manner in reverse. Please ensure to place the filter supporter to its original location in order to avoid filter supporter become deform which can cause dust leaking.
-
Page 12: Troubleshooting
TROUBLESHOOTING What to do if your cleaner does not work Check that the appliance is correctly plugged in and that the socket outlet is working. In case that the thermal cut-off device has operated, wait until it resets after approximately 60 minutes. If after having checked the mentioned points, the cleaner does not work, take it to an Authorized Service Centre to be repaired. -
Page 13: Specifications
SPECIFICATIONS MODEL NO. MC-YL697K / 697 MC-YL695K / 695 MC-YL693K / 693 MC-YL691K / 691 MC-YL690K / 690 INPUT POWER (MAX.) 2100W 1900W 1700W 1500W 1500W DUST CAPACITY CORD LENGTH NET WEIGHT 5.8kg 5.6kg 5.4kg EXTENTION WANDS METAL X 2 PLASTIC X 2 BLOWER OPERATION FLOOR NOZZLE... - Page 14 MEMO...
- Page 15 Panasonic Manufacturing Malaysia Berhad� �6���‐K� No. 3, Jalan Sesiku 15/2, Shah Alam Industrial Site, 40200 Shah Alam, Selangor Darul Ehsan, Malaysia. http://www.panasonic.co.jp/global/ Printed in Malaysia V01Z8100C...