Advertisement
Installation
¢
Be sure to use the parts supplied and to install the unit securely.
lf parts other than those supplied (specified) are used, they may
loosen or damage internal parts.
e
Be sure to install the unit in places where the driver is not bothered
and where there is no danger of passengers being injured in case
of sudden stops.
¢
Be sure to consult your dealer before making any holes in the car.
e
Make sure to take off the (—) side connector on the car battery
to prevent short circuits.
When you finish the installation, be sure to make one more check
to be sure everything is done correctly. Reinstall all car parts that
were removed.
Reconnect the negative battery cable.
Installation Cautions
This unit features a-built-in high-power amplifier, so when installed
in a stacked configuration with a separately sold car stereo, be sure
to always position this unit on the top. When this unit is installed
below a car stereo, the heat generated can cause damage to cas-
sette tapes.
Example Installation
This Unit
Lhd ED
Car Stereo
Install under the Dashboard
5.5—6.0¢mm
Hex nut (5 mm) \
(~
Dashboard
s e c oreneunseaay
Sees
Hex screw
(4x 8 mm)
Hex screw
(5x16mm)
4
0)
ie
ow
am
Advertisement
