Accessing The Live Video Stream; Aiming And Focusing The Camera; (Optional) Configuring Sd Card Storage; Configuring The Camera - Motorola IndigoVision UX-2MP-B-S Installation Manual

Ux box camera
Table of Contents

Advertisement

Note:
Cameras do not have a default username or password and will be in a factory default state. You
l
must create a user with administrator privileges before the camera is operational. For more
information, see
Accessing the Live Video Stream
Live video stream can be viewed using one of the following methods:
Web browser interface: http://< camera IP address>/.
l
Network Video Management software application (for example, IndigoVision Control Center).
l
Note:
Cameras do not have a default username or password and will be in a factory default state. You
l
must create a user with administrator privileges before the camera is operational. For more
information, see

Aiming and Focusing the Camera

Use the camera web browser interface or the IndigoVision Control Center software to aim and focus the camera.
Consult the software user guide for more information.
1. In the Image and Display settings area, use the Zoom controls to set the zoom position for the camera.
2. Focus the camera:
a. Click Auto Focus to focus the lens.
b. If the preferred focus was not achieved, use the focus near and far buttons to adjust the focus.

(Optional) Configuring SD Card Storage

To use the camera's SD card storage feature, you must insert an SD card into the card slot.
It is recommended that the SD card have a capacity of 8 GB or more and a write speed of class 10 or better. If the SD
card does not meet the recommended capacity or write speed, the recording performance may suffer and result in the
loss of frames or footage.
1. Insert an SD card into the camera.
CAUTION — Do not force the SD card into the camera or you may damage the card and the camera.
The SD card can only be inserted in one direction.
2. Access the camera's web interface to enable the onboard storage feature. For more information, see the
IndigoVision Camera Web Interface User Guide.

Configuring the Camera

Once installed, use one of the following methods to configure the camera:
Accessing the Live Video Stream
Initializing a Camera Username and Password on the previous
Initializing a Camera Username and Password on the previous
page.
page.
6

Advertisement

Table of Contents
loading

Table of Contents