Table of Contents
Advertisement
2. Remove the sensor circuit from the sensor bottom
cover.
3. Remove the battery from the sensor circuit and
recycle it.
4. Install a new battery. Make sure that the "+" sign of
the battery is put on the "+" sign in the sensor circuit.
5. Make sure that the indicator on the sensor circuit
flashes green.
6. Put the sensor circuit in the foam gasket.
8
7. Put the sensor circuit with the foam gasket into the
sensor bottom cover.
8. Use the point of the maintenance tool to carefully
push the foam gasket into position in the sensor
bottom cover.
CAUTION:
of the sensor circuit.
9. Attach the sensor top cover on the sensor bottom
cover clockwise with the maintenance tool.
Do not push the center
2132 - 001 - 19.10.2023
Advertisement
Table of Contents
