Advertisement
4
OPERATION
1
2
Seal Food in Reusable Container
1.
Connect the vacuum pump to the vacuum contain-
er.
2. Press the start button on the vacuum pump.
3. The button will light to indicate that the vacuum
pump has started.
4. The container will defl ate as the vacuum pump
removes air.
5. The vacuum pump will stop automatically.
Recharging
1.
Open the port on the side of the pump to connect the power cable.
2. Recharge when the indicator shows that the battery is low.
3. The indicator will show that the battery is charging.
4. Disconnect the cable when the battery is full and close the charge port.
3
Reading Indicator Lights
•
•
•
•
•
x3
Battery is low
START
Vacuum sealing in process: Indicator light fl ashing/
pulsing
Vacuum sealing complete: Indicator light lights up
for 2 seconds and then turns off
Low battery: Battery symbol starts blinking 3x
Charging: Battery symbol pulsing slow
Fully charged and ready to unplug: Battery symbol
glowing
1.5sec
Charging in process
4
5
Fully charged
AUTO
STOP
Advertisement
