Table of Contents
Advertisement
The hotplates
Hotplate
Single hotplate
$
Single induction hotplate
$
Double radiation hotplate*
ð
Radiation broiler*
æ
* Activating the hotplate: The corresponding indicator lights up.
Use only cookware suitable for induction cooking on the induction hotplates, see the "Appropriate cookware" section.
Residual heat indicator
The hob has a residual heat indicator
which lights up when they are hot. Avoid touching them when
this indicator is lit.
Programming the hob
This section will show you how to program the hotplates.
The table contains power levels and cooking times for several
dishes.
Switching the hotplate on and off
The range is turned on and off using the main switch.
To switch on: press the
%
main switch and the
indicators light up. The range is ready
‹
for use.
To switch off: press the
%
All hotplates are turned off. The residual heat indicator will
remain lit until the hotplates have cooled down sufficiently.
Note: The range switches off automatically when all the
hotplates have been turned off for more than 20 seconds.
Set the hotplate
Select the required power level with the + and - symbols.
Power level 1 = minimum power.
Power level 9 = maximum power.
Each power level has an intermediate setting. This is marked
with a dot.
Setting the power level
The range should be switched on.
Press the
§
symbol several times until the
1.
required hotplate lights up.
Melt
Chocolate, chocolate coating, butter, honey
Gelatine
* Uncovered cooking
** Uncovered
6
Turning on and off
Always use cookware of a suitable size.
Always use cookware of a suitable size.
Press the
Press the
•
on each hotplate,
symbol. The indicator next to the
symbol until the indicators go out.
‹
indicator of the
symbol.
ð
æ
symbol.
The
•
light will remain on while the hotplate is hot, even after
the hob has been turned off.
If the pan is removed before the hotplate is switched off, the
will appear and alternate with the selected power level.
Within the next 5 seconds, press the + or - symbol.The basic
2.
setting appears:
+ symbol, power level 1.
- symbol, power level 9.
To change the power level: select the hotplate and press the
3.
+ or - symbol until the required power level appears.
To switch off the hotplate
Select the hotplate and then press the + or - symbol until
symbol appears.
The hotplate turns off and the residual heat indicator appears.
Note: If no pan has been placed on the induction hotplate, the
selected power level flashes. After a certain time, the hotplate
switches off.
Cooking guidelines table
The table below contains some examples.
Cooking times depend on the power level, type, weight and
quality of the food. As such they are approximate.
Power levels affect cooking results.
When heating purées, creams and thick sauces, stir
occasionally.
Use power level 9 to begin cooking.
Power level
Cooking time (min-
utes)
1-1.
-
1-1.
-
•
‹
Advertisement
Table of Contents
