Husqvarna Blastrac EBE 350 Operator's Manual page 27

WARNING:
or near a lifted product. Keep bystanders
away from the work area.
WARNING:
product. Make sure that the lifting eye is
correctly installed and not damaged.
1. Attach the lifting equipment at the lifting eye.
2. Lift the product safely. Hold the handle until the
product is lifted off the ground.
To disassemble the product
To move the product through small openings you can
disassemble the product.
1. Open the separator door and look if there is abrasive
material in the hopper. If there is abrasive material
in the hopper, empty it. Refer to
material from the hopper on page 19 .
2. Disconnect the product from the power supply.
3. Remove the dust collector hose.
4. Cut the cable ties that hold the power supply cables.
5. Disconnect the cables to the control panel.
2111 - 001 - 21.07.2023
Do not walk or stay below
Do not lift a damaged
To remove abrasive
6. Remove the control panel.
7. Remove the fan housing.
8. Remove the V-belt cover.
27