LG FV9A90W2 Owner's Manual page 40

Symptoms
Thumping sound
Vibrating noise
Operation
Symptoms
Water is leaking.
Appliance does not
operate.
40
Wash load may be out of balance.
• Pause the cycle and redistribute the load after the door unlocks.
Package materials are not removed.
• Remove package materials.
Wash load may be unevenly distributed in the drum.
• Pause the cycle and redistribute the load after the door unlocks.
Not all levelling feet are resting firmly and evenly on the floor.
• See the Levelling the Appliance to adjust the levelling of the appliance.
Floor not rigid enough.
• Check if the floor is sold and does not flex. See the Installation Place
Requirements to select the proper location.
House drain pipes are clogged.
• Unclog the drain pipe. Contact plumber if necessary.
Leakage is caused by improper installation of drain hose or clogged
drain hose.
• Clean and straighten the drain hose. Check and clean the drain filter
regularly.
Control panel has powered off due to inactivity.
• This is normal. Press the Power button to turn the appliance on.
Appliance is unplugged.
• Make sure that the cord should be plugged securely into a working outlet.
Water supply is turned off.
• Turn the water supply tap completely.
Controls are not set properly.
• Make sure that the cycle should be correctly set. Close the door and press
the Start/Pause button.
Door is open.
• Close the door and make sure that nothing should be caught under the
door preventing it from closing completely.
Circuit breaker/fuse is tripped/blown.
• Check house circuit breakers/fuses. Replace fuses or reset breaker. The
appliance should be on a dedicated branch circuit. The appliance will
resume the cycle where it stopped once power is restored.
Possible Cause & Solution
Possible Cause & Solution
EN