Advertisement
ACCESSORY AND INSTALL MANNER
e
Metal fixture
1
i.
Pan head
screws (M3
x 5)
Tapping screws
(64x 14)
=
[+
M@ INSTALL MANNER
1. Before installation and wiring, remove the {—) terminal of the battery to preveni short-
circuiting.
. Connect the input and output cords of the system.
. Connect the ground to the metal chassis of the car.
. Connect the back-up power supply lead (yellow).
. Install the set and after confirming the installation and wirings are correct, connect the
(—) terminal of the battery.
@ ACCESSORY
ao
AB © BO
if a fuse is blown, first check that the associated wires are not short-
circuited then replace the fuse with a new one having the same capacity.
14
(En)
Advertisement
