Warranty And Support - Philips BG7025 Quick Start Manual

Cleaning the trimmer
1 Turn off the trimmer head (Fig. 9).
2 Remove the comb by pressing the length
selector (1) and sliding it upwards (2) (Fig. 16).
Rinse the comb with water.
3 Open the cutting element by pressing the
cutting element upwards with your thumb (Fig.
17).
4 Clean the hair chamber with the brush and rinse
it under the tap (Fig. 18).
5 Shake off excess water. Allow the appliance to
air dry completely.
- Never dry the trimmer head with a towel or
tissue, as this may cause damage.
6 Close the trimming unit. You will hear a 'click'
(Fig. 19).
7 Reattach the trimming comb (1) and press the
length selector button to lock it in the right
position (2) (Fig. 20).
Cleaning the shaver head
1 Turn off the appliance (Fig. 12).
2 Pull the shaving foil unit out of the shaver head
(Fig. 21).
- Hold the shaving foil unit by the plastic housing
only.
3 Rinse the shaving foil unit with luke warm
running tap water. Shake off excess water (Fig.
22).
4 Allow the shaving foil head to air dry
completely.
- Never dry trimmer or shaving foil head with a
towel, brush or tissue, as this may cause
damage.
5 Rinse the hair chamber under luke warm
running tap water to remove any residual debris
(Fig. 23).
6 Reattach the shaving foil unit by snapping it
back onto the shaver head. You will hear a click
(Fig. 24).
Storage
- Be sure the appliance is turned off. Remove
cord from wall socket and the product before
storing it in a safe, dry location where it will not
be crushed, banged, or subject to damage.
- Do not wrap cord around the appliance when
storing.
- Store cord in a safe location where it will not be
cut or damaged.
- Do not place or store the appliance where it
can fall or be pulled into a tub or sink, water or
other liquid while plugged in.
Accessories
Replacement parts may be purchased on our
website www.philips.com/store. For maximum
product performance, replace shaving foil head
once a year.
- Model BG2000 Philips Replacement Shaving
Foil Head.
Replacement
For maximum shaving performance, we advise you
to replace the shaving foil unit every year
(BG2000). If the shaving foil unit is worn or
damaged, do not use the appliance and replace
immediately. Always replace the shaving foil unit
with original Philips shaving foil unit Accessories.
1 Switch off the appliance and disconnect it from
the wall outlet.
2 Remove the shaving foil unit by pulling it off the
shaving head (Fig. 21).
Note: Handle the shaving foil unit with care, as it
can be damaged.
3 Place the new shaving foil unit on the appliance
by snapping it into place (Fig. 24). You will hear a
click.
Disposal
- This product contains a rechargeable lithium-
ion battery which must be disposed of properly.
- Contact your local town or city officials for
battery disposal information. You can also call
1-888-224-9764 or visit www.call2recycle.ca for
battery drop-off locations.
- For assistance, visit our website
www.philips.com/support or call
1-800-243-3050 toll free.
- Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused. For recycling
information, please contact your local waste
management facilities or visit
www.recycle.philips.com.

Warranty and support

If you need information or support, please
www.philips.com/support or call toll free:
1-866-800-9311.
Warranty restrictions
- Philips North America LLC (USA) and/or Philips
Electronics Ltd (Canada) warrants its products
for a period of two years after the date of
purchase. If any defect due to faulty materials
and workmanship occurs within this two-year
warranty period, Philips North America LLC
(USA) and/or Philips Electronics Ltd (Canada)
will repair or replace the product at its expense.
- Philips North America LLC (USA) and/or Philips
Electronics Ltd (Canada) will only pay for repair
or replacement if convincing proof is provided,
for instance by means of a receipt, that the day
on which service is claimed is within the
warranty period. Parts that are subject to wear
(such as cutting units and shaving heads) are
not covered by the terms of the international
warranty.
- The warranty is not valid if a defect is due to
damage caused by incorrect use, poor
maintenance (e.g. parts blocked by scale) or if
alterations or repairs have been carried out by
persons not authorized by Philips North
America LLC (USA) and/or Philips Electronics
Ltd (Canada).