Table of Contents
Advertisement
HP-67/HP-97 Applications Pac Compatibility
67
Page 02-02:
Change
0to
00,
5to
05.
Page 07-02:
In the instructions, change all references of
to
7P<>S (ALPHA].
Page 10-02:
In the instructions, change
to
7P<>S [ALPHA].
Page 11-01:
In the instructions, change
to
7P<>S [ALPHA].
Program 11:
This program must be modified with the following procedure:
I.
Using the HP 82104A Card Reader, load NAV-11A.
2.
In normal mode (not USER, ALPHA, or PRGM) press
W G 13,
Switch to PRGM mode.
Press (ss7]). You should see LBL D.
Press 0 (zero).
Switch out of PRGM mode and back to USER mode.
Record the revised program on a card for future use. Mark the
card appropriately so you can find it easily.
Standard Pac
Page 05-03:
In the instructions, change
(a] to
20,
(B)to
21,
579) (S to (570) 22, (570) (0] to (570) 23, and (570) (] to (570) 24.
Pages 11-01, 11-04:
Changes references in the instructions to step 112 to line 118.
Program 11:
It is not possible to merge HP-67/HP-97 program cards using the
HP-41C. If you wish to use a function recorded by an HP-67 or
HP-97, read it into the HP-41C then write it back out as an HP-41C
program card. Now you may read program 11 into the HP-41C. Press
M GTo) (-] 118
MRG
and read in your
translated function card.
Advertisement
Table of Contents
