Advertisement
Available languages
Available languages
PRIOR TO USE
Installing the app
•
The app is free, but a separate communication fee
may be charged when downloading.
•
The app is exclusively for Makita products.
•
Please use the app after agreeing to the latest
version of the application terms of use. At the
first startup or installing the app, the terms of use
screen will be displayed.
•
The application screen may be changed or
unavailable without notice due to future updates.
For smartphones/tablets
Preparation in advance
A smartphone/tablet (iOS or Android) is necessary to
use the app.
•
iOS (iPhone): iOS 13 or later is required.
•
Android: Android Version 9.0 or later is required.
With some exceptions, Android devices need to
allow location information to be used for Bluetooth
connections.
Installing the app
1.
Search for "Makita Tool Management" on App
Store or Google Play.
You can also access from the QR code in the
following figure.
Smartphone app download site
► Fig.3
2.
Install the app. A "Makita Tool Management" icon
will be created on the home screen.
For PCs
System requirements
The PC must satisfy the following requirements to use
the app.
•
OS: Windows 10, or Windows 11
Installing the app
1.
Access the URL shown in the following figure.
PC app download site
► Fig.4
2.
Download "MakitaToolManagementSetup_EN_
v1020.exe" and install the app.
Connecting the PC
Before starting the app, connect this connector to the
PC.
► Fig.5
NOTICE:
Do not disconnect the USB cable while
the USB connection lamp of this connector is
flashing.
Installing the battery cartridge/tool
Optional accessory
Before starting up the app, install the battery cartridge
and the tool to this connector.
Installing or removing battery
cartridge
CAUTION:
Always install the battery cartridge
fully until the red indicator cannot be seen. If not,
it may accidentally fall out of this connector, causing
injury to you or someone around you.
CAUTION:
Be careful not to pinch your finger
between the battery cartridge and the terminals.
NOTICE:
Charge the battery cartridge before
use. The battery cartridge that has no remaining
capacity cannot be used.
NOTICE:
When removing the battery cartridge,
make sure that the installed tool is completely
stopped and there is no communication with the
app. Otherwise malfunction may occur.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator as
shown in the figure, it is not locked completely.
To remove the battery cartridge, slide it from this
connector while sliding the button on the front of the
cartridge.
► Fig.6: 1. Red indicator 2. Button 3. Battery cartridge
Installing or removing tool
CAUTION:
Do not put your finger on the
switch of the tool. Otherwise unintentional starting
may cause and injury result.
NOTICE:
When installing or removing the tool,
make sure that the installed tool is completely
stopped. Otherwise malfunction may occur.
NOTICE:
When removing the tool, make sure
that there is no communication with the app.
Otherwise malfunction may occur.
NOTE: The tool does not drive with this connector
attached.
To install the tool, align the tongue on this connector
with the groove in the housing and slip it into place.
Insert it all the way until it locks in place with a little click.
To remove the tool, slide it from this connector while
sliding the button on the front of this connector.
► Fig.7
7 ENGLISH
Advertisement
