Ac Hookups; Before You Use Your Receiver - Sony R-D-S EON STR-D365 Operating Instructions Manual

Getting Started
Selecting the speaker system
To drive the speakers, select the speaker system as
follows:
To drive Depress SPEAKERS button
Speaker system A (connected A
to the FRONT SPEAKERS A
terminals)
Speaker system B (connected 8B
to the FRONT SPEAKERS B
terminals)
Both speaker systems AandB A+B
(series connection)
Where do | go next?
Go on to the next section to connect an AC plug and
complete your home theatre system.
AC Hookups
Connecting the mains lead
Connect the mains lead from this receiver and from
your audio/video components to a wall outlet.
If you connect other audio components to the
SWITCHED AC OUTLET on the receiver (STR-D365
only), the receiver can supply power to the connected
components so you can turn on/off the whole system
when you turn on/off the receiver.
SWITCHED AC OUTLET
in
QO©C|O
|
&
oak
to a wall outlet
Caution
Make sure that the power consumption of the component
connected to the receiver's AC outlet does not exceed 100
watts. Do not connect high-wattage electrical home appliances
such as electric irons, fans, or TVs to this outlet.
Where do | go next?
Before you use the receiver, go to the next section to make
sure that all the controls are set to the appropriate positions.
SSS en nn ee gee)
Before You Use Your Receiver
Before you start using your receiver, make sure that
you have:
¢ Turned VOLUME to the leftmost position (0).
* Selected the appropriate speaker system. (See
"Selecting the speaker system" .)
¢ Set BALANCE to the centre position.
Turn on the receiver and check the following indicator.
e Press MUTING if the MUTING indicator turns on.
7%