Disassembly Procedure; Removing The Rear Cover - JVC AV-2771S Service Manual

AV-2771S
SPECIFIC SERVICE INSTRUCTIONS
DISASSEMBLY PROCEDURE
@REMOVING THE REAR COVER
@ Check that the power cord is disconnected from the
Outlet.
1. Take out 11 screws © indicated in Fig. 1.
2. Disconnect the power cord from the rear cover and
pull the cover outward to remove it.
XX When reinstalling the rear cover, carefully push it
inward aftér inserting the main chassis into the rear
cover groove.
®MAIN CHASSIS EXTRACTION
e@ Remove the rear cover.
1. Slightly raise the chassis and pull it outward (Fig. 2).
%€ Disengage wire clamps as required.
®REMOVING THE SPEAKERS
@ Remove the rear cover.
1. Take out 2 screws © indicated in Fig. 3.
2. Take out 4 screws ©.
XX Fig. 3 indicateds only the right speaker. Remove the
left speaker in the same manner.
3X When installing the speaker grille, use care to properly
engage the grooves with the cabinet.
24 (No.50577)