Philips 32-LCD DIGITAL CABLE READY FLAT HDTV PIXEL PLUS 32PF7320A - Firmware Upgrade Readme File Manual page 2

Automatic software upgrade pro c e d u re
Software Upgrade Application
Upgrade busy...
Software Id: TL32E-234
Loading
Validating
Programming
M a nual software upgrade pro c e d u re
Settings
I n s t a l l a t i o n
Software upgrade
L a n g u a g e
Current software info
Autoprogram
Local upgrades/applications
Weak channel installation
Software upgrade
Info
2
& Power off your TV and re m ove all memory dev i c e s .
é I n s e rt the USB portable memory that contains the
d ownloaded software upgrade.
Switch on your TV with the power switch B at the
"
right side of the T V.
' At startup the TV will scan the USB port a b l e
m e m o ry until it finds the update content. The TV will
a u t o m a t i c a l l y go to the upgrade mode. After a few
seconds it will display the status of the upgrade
p ro c e d u re.
Wa rn i n g
• You are not allowed to remove the USB port a bl e
Done
m e m o ry during the software upgrade procedure!
Done
• In case of a power drop during the upgrade procedure,
don't remove the USB port a bl e memor y from the T V.T h e
TV will continue the upgrade as soon as the pow e r
comes back.
• If you try to upgrade to a software version lower than
the current vers i o n , a confirmation will be aske d .
D ow n g rading to older software should only be done in
case of real necessity.
• If an error occurs during the upgrade you should retry
the procedure or contact your dealer.
( When the software upgrade was successful, re m ove
the USB portable memory and re s t a rt your TV with
the power switch B at the right side of the T V.
Your TV will start up with the new software.
N o t e : Once the upgrade is finished use your PC to remov e
the TV software from your USB port a bl e memory.
For a manual software upgrade copy the " a u t o r u n . u p g "
file in a dire c t o ry called "Upgrades" located in the ro o t
of the USB portable memory.
& I n s e rt the portable memory that contains the
d ownloaded software upgrade.
é Select S o f t w a re Upgrade in the Installation menu .
Go to Local upgrades/ap p l i c a t i o n s.
The TV will list all compatible images available on the
USB portable memory and display the data for each
selected upgrade image.
" Select the correct upgrade image and press the re d
color button to start the upgrade.
Your TV will re s t a rt and will automatically go to the
upgrade mode. After a few seconds it will display the
status of the upgrade pro c e d u re.
Wa rn i n g
• If you try to upgrade to a software version equal or
l ower than the current vers i o n , a confirmation will be
a s ke d . D ow n g rading to older software should only be
done in case of real necessity.
When the software upgrade was successful, re m ove
'
the USB portable memory and re s t a rt your TV with
the power switch B at the right side of the T V.
Your TV will start up with the new software.