Pptp - D-Link DWR-922 User Manual

Section 4 - Configuration
Address Mode: Choose Static IP only if your ISP assigns you an IP address.
Otherwise, please choose Dynamic IP.
PPTP IP Address: Enter the information provided by your ISP (Only applicable for
Static IP PPTP).
PPTP Subnet Enter the information provided by your ISP (Only applicable for
Mask: Static IP PPTP).
PPTP Gateway IP Enter the information provided by your ISP (Only applicable for
Address: Static IP PPTP).
PPTP Server IP IP address of PPTP server.
Address:
Username: User/account name that your ISP provides to you for PPTP dial-up.
Password: Password that your ISP provides to you for PPTP dial-up.
Verify Password: Re-enter your password for verification.
Choose Always-on when you want to establish PPTP connection
Reconnect
all the time. If you choose Connect-on-demand, the device will
Mode:
establish a PPTP connection when local users want to connect
to the Internet, and disconnect if there is no traffic after the time
period defined by the Maximum Idle Time setting.
Maximum Idle The time of no activity to disconnect your PPTP session. Set it to
zero or choose Always-on to disable this feature.
Time:
D-Link DWR-922 User Manual

PPTP

13